CS5205A-1

Features:

·Output Current to 5A
·Output Trimmed to +/- 1%
·Dropout Voltage 1.15V @ 5A
·Fast Transient Response
·Fault Protection Circuitry  Thermal Shutdown  Overcurrent Protection  Safe Area Protection


Specifications

Supply Voltage, V_CC.................................................................................................................17V
Operating Temperature Range .................................................................................-40 to 70
Junction Temperature ..........................................................................................................150
Storage Temperature Range ..................................................................................-60 to 150
Lead Temperature Soldering Wave Solder (through hole styles only) ...10 sec. max, 260 peak
Reflow (SMD styles only) ...................................................60 sec. max above 183, 230 peak


Description

The CS5205A-1 linear regulator provides 5A at an adjustable voltage with an accuracy of ±1%. Two external resistors are used to set the output voltage within a 1.25V to 13V range.

The regulator CS5205A-1 is intended for use as a post regulator and microprocessor supply. The fast loop response and low dropout voltage make this regulator ideal for applications where low voltage operation and good transient response are important.

The circuit CS5205A-1 is designed to operate with dropout voltages as low as 1V depending on the output current level. The maximum quiescent current is only 10mA at full load.

The regulator CS5205A-1 is fully protected against overload conditions with protection circuitry for Safe Operating Area (SOA), overcurrent and thermal shutdown.

The CS5205A-1 is pin compatible with the LT1084 family of linear regulators but has lower dropout voltage.

The regulator CS5205A-1 is available in TO-220 and surface mount D² packages.