Features: • Output Current to 4.0 A• Output Trimmed to ±1.0%• Dropout Voltage 1.10 V @ 4.0 A• Fast Transient Response• Fault Protection Circuitry − Thermal Shutdown − Overcurrent Protection − Safe Area ProtectionSpecifications Parameter Val...
CS5204-3: Features: • Output Current to 4.0 A• Output Trimmed to ±1.0%• Dropout Voltage 1.10 V @ 4.0 A• Fast Transient Response• Fault Protection Circuitry − Thermal Shutdo...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Parameter |
Value |
Unit | |
Supply Voltage, VCC |
17 |
V | |
Operating Temperature Range |
−40 to +70 |
°C | |
Junction Temperature |
150 |
°C | |
Storage Temperature Range |
−60 to +150 |
°C | |
Lead Temperature Soldering: |
Wave Solder (through hole styles only) Note 1 Reflow (SMD styles only) Note 2 |
260 Peak 230 Peak |
°C |
The CS5204-x series of linear regulators provides 4.0 A at adjustable and fixed voltages with an accuracy of ±1.0% and ±2.0% respectively. The adjustable version uses two external resistors to set the output voltage within a 1.25 V to 13 V range.
The regulators CS5204-3 are intended for use as post regulators and microprocessor supplies. The fast loop response and low dropout voltage make these regulators ideal for applications where low voltage operation and good transient response are important. The circuit is designed to operate with dropout voltages as low as 1.0 V depending on the output current level.
The maximum quiescent current CS5204-3 is only 10 mA at full load. The regulators are fully protected against overload conditions with protection circuitry for Safe Operating Area (SOA), overcurrent and thermal shutdown.
The regulators CS5204-3 are available in TO-220-3 and surface mount D2PAK-3 packages.