COP940C

The COP940C ROM and OTP based microcontrollers are highly integrated COP8 based core devices with smaller memory(1k/2k) and fewer on-board features.These single-chip CMOS devices are suited for lower-functionality applications where system cost is of prime consideration.

Features of the COP940C are:(1)low current drain (typically < 1A);(2)single supply operation:2.5V to 6.0V;(3)temperature range : 0 to +70,-40 to +85,-55 to +125;(4)real time emulation and full program debug offered by metalink's development systerm.

The absolute maximum ratings of the COP940C can be summarized as:(1):the parameter is supply voltage (VCC),the rating is 7,the unit is V;(2):the parameter is voltage at any pin,the rating is -0.3 to VCC+0.3,the unit is V;(3):the parameter is total current into VCC pin (source),the rating is 50,the unit is mA;(4):the parameter is total current out of GND pin (sink),the rating is 60,the unit is mA;(5):the parameter is storage temperature range,the rating is -65 to +140,the unit is ;(6):the parameter is ESD protection level,the rating is 2,the unit is kV.