CLC420

Features:

300MHz small signal bandwidth
1100V/s slew rate
Unity-gain stability
Low distortion, -60dBc at 20MHz
0.01% settling in 18ns
0.2A input offset current
2pAHz current noise


Application

Active filters/integrators
Differential amplifiers
Pin diode receivers
Log amplifiers
D/A converters
Photo multiplier amplifiers


Pinout




Specifications

Supply Voltage (VCC)                                                             ±7V
I_OUT
(is short circuit protected to ground,
but maximum reliability will be
maintained if I_OUT does not exceed
70mA, except A8D, B8D which should
not exceed 35mA over the military
temperature range)..
Common Mode Input Voltage                                                ±V_CC
Differential Input Voltage                                                        10V
Junction Temperature                                                        +150°C
Operating Temperature Range
AJ:                                                                        −40°C to +85°C
Storage Temperature Range                              −65°C to +150°C
Lead Solder Duration (+300°C)                                           10 sec


Description

The CLC420 is an operational amplifier designed for applications requiring matched inputs, integration or transimpedance amplification. Utilizing voltage feedback architecture, the CLC420 offers a 300MHz bandwidth, a 1100V/s slew rate and a 4mA supply current (power consumption of 40mW,±5V supplies).Applications such as differential amplifiers will benefit from 70dB common mode rejection ratio and an input offset current of 0.2A. With its unity-gain stability, 2pAHz current noise and 3A of input bias current, the CLC420 is designed to meet the needs of filter applications and log amplifiers.The low input offset current and current noise, combined with a settling time of 18ns to 0.01% make the CLC420 ideal for D/A converters, pin diode receivers and photo multipliers amplifiers. All applications will find 70dB power supply rejection ratio attractive.