CLC014

Features:

·Automatic equalization of coaxial and twisted pair cables
·Carrier detection and output mute
·Output eye monitor
·Single supply operation: +5V or −5.2V
·Single-ended or differential input
·Low cost


Application

·SMPTE 259M serial digital interfaces: NTSC/PAL, 4:2:2 component and wide screen; also 540 Mbps (4:4:4:4)
·Serial digital video routing and distribution
·Serial digital data equalization and reception
·Data recovery equalization: ATM, CAD networks, medical, set top terminals, industrial video networks


Pinout




Specifications

Supply Voltage (V_CCV_EE)                             −0.3V, +6.5V
Maximum Junction Temperature                              +150
Storage Temperature Range                    −65 to +150
Lead Temperature
(Soldering 4 sec.)                                                    +260
ESD Rating (Note 14)                                               <500V
_JA 14-Pin SOIC (AJE)                                             95/W
MTTF (based on limited life test data)       4.8 x 107 hours


Description

National's CLC014 adaptive cable equalizer is a low-cost monolithic solution for equalizing data transmitted over cable (or any media with similar dispersive loss characteristics). The CLC014 simplifies the task of high-speed data recovery with a one-chip solution and a minimal number of external components. The equalizer automatically adapts to equalize any cable length from zero meters to lengths that attenuate the signal by 40 dB at 200 MHz. This corresponds to 300 meters of Belden 8281 or 120 meters of Category 5 UTP (unshielded twisted pair).

The CLC014 provides superior jitter performance: 180pspp for 270 Mbps data that has passed through 200 meters of Belden 8281 cable. This exceptional performance provides wide error margin in digital data links.

CLC014 equalizer operates on a single supply with a power consumption of only 290 mW. CLC014 small 14-pin SOIC package allows for high-density placement of components for multichannel applications such as routers. The equalizer operates over a wide range of data rates from less than 50 Mbps to rates in excess of 650 Mbps.

CLC014 equalizer is flexible in allowing either single-ended or differential input drive. CLC014's high common mode rejection provides excellent immunity to interference from noise sources. On-chip quantized feedback eliminates baseline wander.

Additional features include a carrier detect output and an output mute pin which, when tied together, mute the output when no signal is present. A buffered eye monitor output is provided, for viewing the equalized signal prior to the comparator. Differential AEC pins allow the user to set the internal daptive loop time constant with one external capacitor. Also, the CLC014 is insensitive to the pathological patterns inherent in the video industry standards.