CDP8

The Gamewell-FCI CDP8 Constant-Duty Power Supply is a regulated, power-limited, 24 VDC, 8.0 amp. power supply which can be used anywhere a constant 24 VDC source is required. The CDP8 is suited and UL-Listed for fire alarm, access control, and general power supply applications.
The Gamewell-FCI CDP8 provides four (4) power-limited, 24 VDC, 3.0 amp. outputs. Each output can be individually configured to shed its load (turn off) during a power failure to extend available standby battery power for designated critical circuits.
Each output circuit is monitored for overload or shorted conditions, with the trouble condition indicated by a specific
circuit trouble LED and activation of the common trouble relay. Overloaded circuits will automatically restore when
the overload is removed.
Engineer's Specifications of the The Gamewell-FCI CDP8 are as following mentioned: The power supply shall provide four (4) output circuits capable of up to 3.0 amp. continuous 24 VDC each to a maximum of 8.0 amps. total. The output voltage shall be regulated and power-limited. Each output circuit shall be configurable to shed CDP8's load with the loss of the primary AC source. The Constant-Duty Power Supply shall include an internal battery charger with charging capacity of 26 AH. CDP8 shall also be operational from an externally charged battery. Operational troubles shall be indicated by seven LEDs and a common trouble Form-C relay. The supply shall also have a delayed AC Fail relay. The Constant-Duty Power Supply shall be Gamewell-FCI, model CDP8.
The Gamewell-FCI CDP8 has many features: 1. Four (4) configurable monitored outputs; 2.8.0 A, 24 VDC, fully regulated full-load output (power-limited); 3.Seven (7) trouble and status LEDs; 4. Common trouble Form-C relay;
5.Isolated AC Fail Form-C relay; 6.Selectable AC Fail notification relay; 7. Ground fault detection; 8. 26.0 A battery-charger capability; 9. Selectable internal battery charger disable; 10. Selectable internal ground fault detection disable; 11. Selectable load shedding on AC Fail per output.