CD74HCT40103

Features:

• Synchronous or Asynchronous Preset
• Cascadable in Synchronous or Ripple Mode
• Fanout (Over Temperature Range)
   - Standard Outputs . . . . . . . . . . . . . . . 10 LSTTL Loads
   - Bus Driver Outputs . . . . . . . . . . . . .  . 15 LSTTL Loads
• Wide Operating Temperature Range . . -55oC to 125oC
• Balanced Propagation Delay and Transition Times
• Significant Power Reduction Compared to LSTTL
   Logic ICs
• HC Types
   - 2V to 6V Operation
   - High Noise Immunity: N_IL = 30%, N_IH = 30% of V_CC
   at V_CC = 5V
• HCT Types
   - 4.5V to 5.5V Operation
   - Direct LSTTL Input Logic Compatibility,
   V_IL= 0.8V (Max), V_IH = 2V (Min)
   - CMOS Input Compatibility, I_l 1A at V_OL, V_OH


Application

Audio
Automotive
Broadband
Digital Control
Military
Optical Networking
Security
Telephony
Video & Imaging
Wireless


Pinout




Description

The 'HC40103 and CD74HCT40103 are manufactured with high speed silicon gate technology and consist of an 8-stage synchronous down counter with a single output which is active when the internal count is zero. The 40103 contains a single 8-bit binary counter. Each has control inputs for enabling or disabling the clock, for clearing the counter to its maximum count, and for presetting the counter either synchronously or asynchronously. All control inputs and the TC output are active-low logic.

In normal operation, the CD74HCT40103  counter is decremented by one count on each positive transition of the CLOCK (CP). Counting is inhibited when the TE input is high. The TC output goes low when the count reaches zero if the TE input is low, and remains low for one full clock period.

When the PE input is low, data at the P0-P7 inputs are clocked into the counter on the next positive clock transition regardless of the state of the TE input. When thePL input is low, data at the P0-P7 inputs are asynchronously forced into the counter regardless of the state of the PE , TE , or CLOCK inputs. Input P0-P7 represent a single 8-bit binary word for the 40103. When the CD74HCT40103 MR input is low, the counter is asynchronously cleared to its maximum count of 25510,
regardless of the state of any other input. The precedence relationship between control inputs is indicated in the truth table.

If all control inputs except TE are high at the time of zero count, the counters will jump to the maximum count, giving a counting sequence of 10016 or 25610 clock pulses long.

The 40103 may be cascaded using the TE input and the TE output, in either a synchronous or ripple mode. These circuits possess the low power consumption usually associated with CMOS circuitry, yet have speeds comparable to low power Schottky TTL circuits and can drive up to 10 LSTTL loads.