High Level Output Current
:
Number of Gates
: 4
Maximum Operating Temperature
: + 125 C
Number of Lines (Input / Output)
: 2 / 1
Product
: NAND
Supply Voltage - Min
: 2 V
Logic Family
: 74HC
Supply Voltage - Max
: 6 V
Packaging
: Tube
Mounting Style
: Through Hole
Package / Case
: PDIP-14
Low Level Output Current
: 5.2 mA
Propagation Delay Time
: 100 ns
Features: • Buffered Inputs
• Typical Propagation Delay: 8ns at VCC = 5V,
CL = 15pF, TA = 25oC
• Output Pull-up to 10V
• Fanout (Over Temperature Range)
- Standard Outputs . . . . . . . . . . . . . . . 10 LSTTL Loads
- Bus Driver Outputs . . . . . . . . . . . . . 15 LSTTL Loads
• Wide Operating Temperature Range . . . -55oC to 125oC
• Balanced Propagation Delay and Transition Times
• Significant Power Reduction Compared to LSTTL
Logic ICs
• HC Types
- 2V to 6V Operation
- High Noise Immunity: NIL = 30%, NIH = 30% of VCC
at VCC = 5V
• HCT Types
- 4.5V to 5.5V Operation
- Direct LSTTL Input Logic Compatibility,
VIL= 0.8V (Max), VIH = 2V (Min)
- CMOS Input Compatibility, Il 1µA at VOL, VOHPinoutSpecificationsDC Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to 7V
DC Input Diode Current, IIK
For VI < -0.5V or VI > VCC + 0.5V. . . . . . . . . . . . . . . . . . . . . .±20mA
DC Output Diode Current, IOK
For VO < -0.5V or VO > VCC + 0.5V . . . . . . . . . . . . . . . . . . . .±20mA
DC Output Source or Sink Current per Output Pin, IO
For VO > -0.5V or VO < VCC + 0.5V . . . . . . . . . . . . . . . . . . . .±25mA
DC Drain Current, per Output, IO
For -0.5V < VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -25mA
DC VCC or Ground Current, ICC or IGND . . . . . . . . . . . . . . . . . .±50mADescriptionThe 'HC03 and 'HCT03 logic gates utilize silicon gate CMOS technology to achieve operating speeds similar to LSTTL gates with the low power consumption of standard CMOS integrated circuits. CD74HC03E have the ability to drive 10 LSTTL loads. The HCT logic family is functionally as well as pin compatible with the standard LS logic family.
These open drain NAND gates can drive into resistive loads to output voltages as high as 10V. Minimum values of RL required versus load voltage are shown in Figure 2.
Parameters: Technical/Catalog Information | CD74HC03E |
Vendor | Texas Instruments |
Category | Integrated Circuits (ICs) |
Number of Circuits | 4 - Quad |
Package / Case | 14-DIP (300 mil) |
Logic Type | NAND Gate |
Packaging | Tube |
Mounting Type | Through Hole |
Number of Inputs | 2 |
Current - Output High, Low | 5.2mA, 5.2mA |
Supply Voltage | 2 V ~ 6 V |
Operating Temperature | -55°C ~ 125°C |
Voltage - Supply | 2 V ~ 6 V |
Drawing Number | 296; 4040049; N; 14, 16, 18, 20 |
Lead Free Status | Lead Free |
RoHS Status | RoHS Compliant |
Other Names | CD74HC03E CD74HC03E |