CBTS3257

• 5 switch connection between two ports
• TTL-compatible input levels
• Schottky diodes on I/O clamp undershoot
• Minimal propagation delay through the switch
• Latch-up protection exceeds 500 mA per JESD78
• ESD protection exceeds 2000 V HBM per JESD22-A114,200 V MM per JESD22-A115 and 1000 V CDM per JESD22-C101

NOTES:
1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
2. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed.

The CBTS3257 is a quad 1-of-2 high-speed TTL-compatible multiplexer/demultiplexer. The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise.

Output Enable (OE) and select-control (S) inputs select the appropriate B1 and B2 outputs for the A-input data.

Internal Schottky diode CBTS3257 provides I/O undershoot protection.

The CBTS3257 is characterized for operation from 40 to +85 °C.