Features: Precision Power Supply Voltage Monitor 5V, 3.3V, 3V & 2.5V systems 7 threshold voltage options Active High or Low Reset Valid reset guaranteed at VCC = 1 VSupports Standard and Fast I2C Protocol 16-Byte Page Write Buffer Low power CMOS technology1,000,000 Program/Erase cycles 100 ye...
CAT14016: Features: Precision Power Supply Voltage Monitor 5V, 3.3V, 3V & 2.5V systems 7 threshold voltage options Active High or Low Reset Valid reset guaranteed at VCC = 1 VSupports Standard and Fast I...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $.05 - .07 / Piece
Resistor Networks & Arrays 000ohm 5% Concave 4resistors
Parameters | Ratings | Units |
Storage Temperature | -65 to +150 | °C |
Voltage on Any Pin with Respect to Ground(2) | -0.5 to +6.5 | V |
The CAT140xx (see table below) are memory and supervisory solutions for microcontroller based systems. A CMOS serial EEPROM memory and a system power supervisor with brown-out protection are integrated together. Memory interface is via both the standard (100kHz) as well as fast (400kHz) I2C protocol.
The CAT140xx provides a precision VCC sense circuit with two reset output options: CMOS active low output or CMOS active high. The RESET output is active whenever VCC is below the reset threshold or falls below the reset threshold voltage.
The power supply monitor and reset circuit CAT14016 protect system controllers during power up/down and against brownout conditions. Seven reset threshold voltages support 5V, 3.3V, 3V and 2.5V systems. If power supply voltages are out of tolerance reset signals become active, preventing the system microcontroller, ASIC or peripherals from operating. Reset signals become inactive typically 240ms after the supply voltage exceeds the reset threshold level.