CA76-1

The CA76-1 is a kind of cascadable amplifier which possesses the specifications of (1)frequency: 3-600MHz(typical)/5-500MHz(0 to 50°C)/5-500MHz(-54 to +85°C)(following other specifications are listed in this order); (2)small signal gain: 27.5dB/26.0dB/25.0 dB; (3)gain flatness ±0.3dB/±0.8dB/±1.0dB; (4)reverse isolation: 36dB; (5)CA76-1 noise figum (max ): 3.0dB/4.0dB/4.5dB; (6)power output @ 1dB comp.: 12.7dBm/12.0dBm/11.0dbm; (7)Ip3: +26dBm; (8)Ip2: +36dBm; (9)second order hannonic IP: +41dBm; (10)VSWR input/output: (1.5:1/1.5:1)/ (1.9:1 /1.9:1)/(2.0:1 /2.0:1); (11)DC current @5 volts: 48mA/51mA/53mA(* Measured in a 50-ohm system at +5 Vdc Nominal. Subject to change without notice.).

The features of CA76-1 can be summarized as (1)low noise figure: +12.7dBm(typ.): +12.7dBm(TYP.); (2)high output level:+12.7dBm(typ); (3)high gain-two stages: 27.5dB(typ).

The absolute maximum ratings of CA76-1 are (1)storage temperature: -62°C to +125°C; (2)Max. case temperature: 125°C; (3)Max. DC voltage: +10V; (4)Max. continuous RF input power: +6dBm; (5)Max. short term RF input power (1 minute max.): 40mW; (6)Max. peak power (3 sec max.): 0.5W; (7)"S"Series burn-in temperature (case): 125°C.