Features: High resolutionEquipment with wider detection areasAvailable with 256 mm or 512 mm detector length Easily connectable to frame grabber board The signal output method of this X-ray line sensor camera is designed to handle commercially available, digital frame grabber boards.ApplicationDet...
C7390: Features: High resolutionEquipment with wider detection areasAvailable with 256 mm or 512 mm detector length Easily connectable to frame grabber board The signal output method of this X-ray line sen...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
High resolution
Equipment with wider detection areas
Available with 256 mm or 512 mm detector length
Easily connectable to frame grabber board
The signal output method of this X-ray line sensor camera is designed to handle commercially available, digital frame grabber boards.
Scintillator Material |
Gd plastic scintillator |
Effective X-ray tube voltage range | 40 to 160 kV |
Sensor element pitch |
0.4 mm |
Detection width | 512 mm or 256 mm |
Resolution |
512 mm: 1280 pixels |
256 mm: 640 pixels | |
Line speed | 4 to 40 m/min |
A/D conversion |
12 bits |
Digital Interface | RS-422 |
External Control |
RS-232C |
Correction functions | Offset and Brightness |
Operating temperature | 0 to 40°C |
Storage temperature | 10 to +50°C |
Operating/storage humidity |
30% ( no condensation) |
Line voltage | AC100/117/220/240±10% 50/60Hz |
Power consumption | Approx. 100VA |
The C7390 Series X-ray line sensor camera offers high resolution and high sensitivity for capturing finely detailed X-ray images of products or parts moving along on a belt conveyor. X-ray images are obtained in synchronization with external timing signals from the transfer mechanism such as a belt conveyor or by internal timing signals, and are then output as RS-422 digital signals.