BTS5210L

Mounting Style : SMD/SMT
On Resistance (Max) : 140 mOhms
Number of Outputs : 2
Maximum Operating Temperature : + 150 C
On Time (Max) : 250 us
Off Time (Max) : 270 us
Operating Supply Voltage : 5.5 V to 40 V
Supply Current (Max) : 1.7 mA
Package / Case : DSO-12


Application

• µC compatible high-side power switch with diagnostic feedback for 12V and 24V grounded loads
• All types of resistive, inductive and capacitve loads
• Most suitable for loads with high inrush currents, so as lamps
• Replaces electromechanical relays, fuses and discrete circuits




Pinout






Specifications

Parameter	Symbol	Values	Unit
Supply voltage (overvoltage protection see page 6)	Vbb	43	V
Supply voltage for full short circuit protection Tj,start =-40 ...+150°C	Vbb	36	V
Load current (Short-circuit current, see page 6)	IL	self-limited	A
Load dump protection1) VLoadDump = VA + Vs, VA = 13.5 V RI2)= 2,td= 400 ms, IN= low or high each channel loaded with RL = 13.5,	VLoaddump3)	60	V
Operating temperature range Storage temperature range	Tj Tstg	-40 ...+150 -55 ...+150	°C
Power dissipation (DC)4) Ta = 25°C: (all channels active) Ta = 85°C:	Ptot	3,05 1,59	W
Maximal switchable inductance, single pulse Vbb =12V, Tj,start =150°C4), see diagrams on page 10 IL = 2.9A, EAS = 84 mJ, 0 one channel: IL = 5.7A, EAS = 168 mJ, 0 two parallel channels:	ZL	14 7.6	mH
Electrostatic discharge capability (ESD) IN: (Human Body Model) ST,IS: out to all other pins shorted: acc. MIL-STD883D, method 3015.7 and ESD assn. std. S5.1-1993 R=1.5k; C=100pF	VESD	1.0 4.0 8.0	kV
Input voltage (DC) see internal circuit diagram page 9 Current through input pin (DC) Pulsed current through input pin5) Current through status pin (DC)	VIN IIN IINP IST	-10 ... +16 ±0.3 ±5.0 ±5.0	V mA

Description

The BTS5210L is a N channel vertical power MOSFET with charge pump, ground referenced CMOS compatible input and diagnostic feedback, monolithically integrated in smart SIPMOS technology.For further information on technology, delivery terms and conditions and prices of BTS5210L please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide (see address list).

Features of the BTS5210L are:(1)short circuit protection; (2)overload protection; (3)current limitation; (4)thermal shutdown; (5)overvoltage protection (including load dump) with external resistor; (6)reverse battery protection with external resistor; (7)loss of ground and loss of Vbb protection; (8)electrostatic discharge protection (ESD).The reverse load current through the intrinsic drain-source diode has to be limited by the connected load. Power dissipation is higher compared to normal operating conditions due to the voltage drop across the drain-source diode. The temperature protection is not active during reverse current operation! Input and Status currents have to be limited.

The absolute maximum ratings of the BTS5210L can be summarized as:(1)current through input pin (DC):±0.3 mA;(2)supply voltage:43V;(3)supply voltage for full short circuit protection:36V;(4)load dump protection:60V;(5)input voltage:-10 to 16V;(6)storage temp:-55 to +150;(7)operating temp:-40 to +150.Infineon Technologies Components may only be used in lifesupport devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that lifesupport device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body,or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.Integrated protection functions are designed to prevent IC destruction under fault conditions described in the data sheet. Fault conditions are considered as "outside" normal operating range. Protection functions are not designed for continuous repetitive operation.

Parameters:

Technical/Catalog Information	BTS5210L
Vendor	Infineon Technologies
Category	Integrated Circuits (ICs)
Package / Case	DSO-12
Mounting Type	Surface Mount
Type	High Side
Voltage - Supply	5.5 V ~ 40 V
On-State Resistance	110 mOhm
Current - Output / Channel	2.4A
Current - Peak Output	9A
Packaging	Tape & Reel (TR)
Input Type	Non-Inverting
Number of Outputs	2
Operating Temperature	-40°C ~ 150°C
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	BTS5210L BTS5210L