Application·These products are not designed for use in life support appliances, devices or systems where malfunction of theseproducts can be reasonably expected to result in personal injury. Philips customers using or selling these productsfor use in such applications do so at their own risk and a...
BT149: Application·These products are not designed for use in life support appliances, devices or systems where malfunction of theseproducts can be reasonably expected to result in personal injury. Philips...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
·These products are not designed for use in life support appliances, devices or systems where malfunction of these
products can be reasonably expected to result in personal injury. Philips customers using or selling these products
for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting
from such improper use or sale.
SYMBOL | PARAMETER | CONDITIONS | MIN. | MAX. | UNIT | |||
VDRM,VRRM | Repetitive peak off-state voltages |
- | B 2001 |
D 4001 |
E 5001 |
G 6001 |
V | |
IT(AV) | Average on-state current | half sine wave; Tlead 83 |
0.5 | A | ||||
IT(RMS) | RMS on-state current | all conduction angles |
- | 0.8 | A | |||
ITSM | Non-repetitive peak on-state current |
t = 10 ms t = 8.3 ms half sine wave; Tj = 25 prior to surge |
- - |
8 9 |
A A | |||
I2t | I2t for fusing | t = 10 ms | - | 0.32 |
A2s | |||
A/s | ||||||||
dIT/dt | Repetitive rate of rise of on-state current after triggering |
ITM = 2 A; IG = 10mA; dIG/dt =100mA/s |
50 1 |
A | ||||
IGM | Peak gate current | - | 5 | V | ||||
VGM | Peak gate voltage | - | 5 | V | ||||
PGM | Peak gate power | - | 2 | W | ||||
PG(AV) | Average gate power | over any 20 ms period |
- | 0.1 | W | |||
Tstg | Storage temperature | -40 | 150 | |||||
Tj | Operating junction temperature |
- | 125 |
Glass passivated, sensitive gatethyristors BT149 in a plastic envelope,intended for use in general purposeswitching and phase controlapplications. These devices areintended to be interfaced directly tomicrocontrollers, logic integratedcircuits and other low power gatetrigger circuits.