BS62UV256PI

Features:

• Ultra low operation voltage : 1.8V ~ 3.6V
• Ultra low power consumption :
    Vcc = 2.0V     C-grade : 10mA (Max.) operating current
                         I- grade : 15mA (Max.) operating current
                         0.005uA (Typ.) CMOS standby current
    Vcc = 3.0V     C-grade : 20mA (Max.) operating current
                          I-grade : 25mA (Max.) operating current
                         0.01uA (Typ.) CMOS standby current
• High speed access time :
    -15 150ns (Max.) at Vcc = 2.0V
• Automatic power down when chip is deselected
• Three state outputs and TTL compatible
• Fully static operation
• Data retention supply voltage as low as 1.5V
• Easy expansion with CE and OE options


Pinout




Specifications

SYMBOL	PARAMETER	RATING	UNITS
VTERM	Terminal Voltage with Respect to GND	-0.5 to Vcc+0.5	V
TBIAS	Temperature Under Bias	-40 to +125
TSTG	Storage Temperature	-60 to +150
PT	Power Dissipation	1.0	W
IOUT	DC Output Current	20	mA

1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.


Description

The BS62UV256 is a high performance, ultra low power CMOS Static Random Access Memory organized as 32,768 words by 8 bit and operates from a wide range of 1.8V to 3.6V supply voltage.

Advanced CMOS technology and circuit techniques of BS62UV256PI provide both h speed and low power features with a typical CMOS standby current 0.005uA and maximum access time of 150ns in 2V operation.

Easy memory expansion of BS62UV256PI is provided by an active LOW enable (CE), and active LOW output enable (OE) and three-st output drivers.

The BS62UV256 has an automatic power down feature, reducing the power consumption significantly when chip is deselected.

The BS62UV256 is available in the JEDEC standard 28 330mil Plastic SOP, 8mmx13.4mm TSOP (normal type), 300mi SOJ and 600mil Plastic DIP.