Am75DL9608HG

Storage Temperature
Plastic Packages . . . . . . . . . . . 55°C to +125°C
Ambient Temperature
with Power Applied. . . . . . . . . . 40°C to +85°C
Voltage with Respect to Ground
V_CC (Note 1) . . . . . . . . . . . . . . . .0.5 V to +4.0 V
RESET# (Note 2) . . . . . . . . . . . .0.5 V to +12.5 V
WP#/ACC . . . . . . . . . . . . . . .. . .0.5 V to +10.5 V
All other pins (Note 1) . . . ... 0.5 V to V_CC +0.5 V
Output Short Circuit Current (Note 3) . . . . . . 200 mA
Notes: . Minimum DC voltage on input or I/O pins is 0.5 V. uring voltage transitions, input or I/O pins may vershoot V_SS to 2.0 V for periods of up to 20 ns. aximum DC voltage on input or I/O pins is V_CC +0.5 V. ee Figure 7. During voltage transitions, input or I/O pins ay overshoot to V_CC +2.0 V for periods up to 20 ns. See igure 8.
2. Minimum DC input voltage on pins RESET#, and P#/ACC is 0.5 V. Dur ing vol tage transitions, P#/ACC, and RESET# may overshoot V_SS to 2.0 V for eriods of up to 20 ns. See Figure 7. Maximum DC input oltage on pin RESET# is +12.5 V which may overshoot o +14.0 V for periods up to 20 ns. Maximum DC input oltage on WP#/ACC is +9.5 V which may overshoot to 12.0 V for periods up to 20 ns.
3. No more than one output may be shorted to ground at a ime. Duration of the short circuit should not be greater han one second.

Stresses above those listed under "Absolute Maximum atings" may cause permanent damage to the device. This s a stress rating only; functional operation of the device at hese or any other conditions above those indicated in the perational sections of this data sheet is not implied. xposure  f the device to absolute maximum rating onditions for extended periods may affect device reliability.

The following document specifies Spansion memory products that are now offered by both Advanced icro Devices and Fujitsu. Although the document is marked with the name of the company that originally eveloped the specification, these Am75DL9608HG products will be offered to customers of both AMD and ujitsu.