AX88796BLF

Features: High-performance non-PCI local busSupport both 8 bit and 16 bit local CPU interfacesinclude MCS-51 series, 80186 series CPU and ISAbusSRAM-like host interface, easily interfaced to mostcommon embedded MCUsEmbed 8Kx16 bits SRAM for packet buffersSupport Slave-DMA to minimize CPU overheadS...

product image

AX88796BLF Picture
SeekIC No. : 004292356 Detail

AX88796BLF: Features: High-performance non-PCI local busSupport both 8 bit and 16 bit local CPU interfacesinclude MCS-51 series, 80186 series CPU and ISAbusSRAM-like host interface, easily interfaced to mostcom...

floor Price/Ceiling Price

Part Number:
AX88796BLF
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/12/21

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

High-performance non-PCI local bus
Support both 8 bit and 16 bit local CPU interfaces
include MCS-51 series, 80186 series CPU and ISA
bus
SRAM-like host interface, easily interfaced to most
common embedded MCUs
Embed 8Kx16 bits SRAM for packet buffers
Support Slave-DMA to minimize CPU overhead
Support burst-mode read for highest performance
applications
Interrupt pin with programmable Hold-off timer
Single-chip Fast Ethernet controller
Compatible with IEEE802.3, 802.3u standards
Integrate Fast Ethernet MAC/PHY transceiver in
one chip
Support 10Mbps and 100Mbps data rate
Support full and half duplex operations
Support 10/100Mbps N-way Auto-negotiation
operation
Support twisted pair crossover detection and
auto-correction (HP Auto-MDIX)
Support IEEE 802.3x flow control for full-duplex
operation
Support back-pressure flow control for half-duplex
operation
Support VLAN match filter
Support Wake-on-LAN function to reduce power by
following events
Detection of a change in the network link state
Receipt of a Magic Packet
Receipt of a MS wakeup frame
NE2000 register level compatible instruction
Detection performance can be enhanced with only a
minor host driver modification from original
NE2000 driver
Support EEPROM interface to store MAC address
(Optional)
Support up to 2 (out) /1 (in/out) General Purpose pins
Support LED pins for various network activity
indications
Integrate voltage regulator and 25MHz crystal
oscillator
0.18um CMOS process. 3.3V power supply with 5V
tolerance I/O pins
64-pin LQFP , RoHS package
Operate over 0 to +70 °C or -40 to +85 °C temperature
range
US patent approved (NO 6799231)



Pinout

  Connection Diagram


Specifications

Description
Rating
Units
VCCK (Core power supply)
-0.3 to 2.16
V
VCCIO (power supply for 3.3V I/O)
-0.3 to 4.0
V
VCCIO (Input voltage of 3.3V I/O with 5V tolerance)
-0.3 to 5.8
V
Storage Temperature
-65 to 150
°C
IIN (DC input current)
20
mA
IOUT (Output short circuit current)
20
mA



Description

The AX88796B is a low-pin-count (64-pin LQFP) non-PCI Ethernet controller for the Embedded and Industrial Ethernet
applications. The AX88796B supports 8/16-bit SRAM-like host interface, providing a glue-less connection to most common embedded MCUs. The AX88796B integrates on-chip Fast Ethernet MAC and PHY, which is IEEE802.3 10Base-T and IEEE802.3u 100Base-TX compatible, and 8Kx16 bits embedded SRAM for packet buffering to accommodate high bandwidth applications. The AX88796B has a wide array of features including support for Twisted Pair Crossover Detection and Auto-Correction, Wake-on-LAN power management, and IEEE 802.3x and back-pressure flow control. The AX88796B supports two operating temperature ranges, namely, commercial grade from 0 to 70 °C and industrial grade from 40 to 85 °C. The small form factor of 64-pin LQFP package helps reduce the overall PCB space.

The programming of AX88796B is simple and compatible with NE2000, so the users don't need any modification and
can easily port the software drivers to many embedded systems very quickly. Combining these features with ASIX's free TCP/IP software stack for 8-bit microcontrollers, AX88796B provides the best Ethernet solution for embedded networking applications.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Resistors
RF and RFID
LED Products
Prototyping Products
DE1
Potentiometers, Variable Resistors
View more