Features: SpecificationsDescription The InfraTrol AVG5 Averaging Device, provides five averaging objects, each of which gives the average value of up to five network variables from different devices.A changeable type interface means that this device can be used in all kinds of applications, to ave...
AVG 5x5: Features: SpecificationsDescription The InfraTrol AVG5 Averaging Device, provides five averaging objects, each of which gives the average value of up to five network variables from different devices...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The InfraTrol AVG5 Averaging Device, provides five averaging objects, each of which gives the average value of up to five network variables from different devices.A changeable type interface means that this device can be used in all kinds of applications, to average temperature, humidity, energy, etc.Ideal for providing zone HVAC controllers with the average floor temperature from several sensors over a large area.The unit is powered from 24V DC and is equipped with an FT/10 network interface.
Most main plant control systems within large buildings require feedback variables such as temperature from the Fan Coil Units (FCUs) or Variable Air Volume (VAVs) units on each floor, to give the correct demand signal to the Boilers, Chillers and Air Handling Units (AHUs).
In a typical building with over 500 floor controls, it is not feasible to connect the feedback temperature from each controller back to the main plant. This would flood the backbone network with messages as each sensor in the entire building transmits its data back to one controller in the plant room.
The InfraTrol AVG 5x5 has 4 features,the first is 5 individual Avergaing Objects each reading up to 5 variables(changeable SNVT type);the second is 5 Relay function objects for 'Enable'variables;the third is simple,configuration;the four is optimises use of backbone bandwidth.
The InfraTrol AVG 5x5 averaging module collects all the temperatures for five individual zones and provides the average value of each zone for transmission to the main plant, greatly reducing network traffic on the backbone. The unit also provides a relay function for a enable signals from the main plant controls. A single enable message is sent to each floor via the InfraTrol AVG relay function blockusing acknowledged service, and the output of this networkrelay function is connected to each floor control. The relay can repeatedly (using a configurable heartbeat timer) broadcast the signal to the floor controls without using up network bandwidth on the backbone.