ATtiny26L-8PU

Operating Temperature Range :
Data Bus Width : 8 bit
On-Chip ADC : Yes
Operating Supply Voltage : 2.7 V to 5.5 V
Core : AVR
Mounting Style : Through Hole
Maximum Clock Frequency : 8 MHz
Data RAM Size : 128 B
Package / Case : PDIP-20
Program Memory Size : 2 KB
Processor Series : ATTINY2x


Pinout




Description

The ATTINY26L-8PU is designed as a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATtiny26(L) achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.

ATTINY26L-8PU has eight features. (1)High-performance, low-power AVR 8-bit microcontroller. (2)RISC architecture 118 powerful instructions-most single clock cycle execution. (3)Data and non-volatile program memory 2K bytes of in-system programmable program memory flash endurance: 10,000 write/erase cycles. (4)Peripheral 8-bit timer/counter with separate prescaler. (5)Special microcontroller low power idle, noise reduction, and power-down modes. (6)I/O and packages 20-lead PDIP/SOIC: 16 programmable I/O lines. (7)Operating voltages from 2.7V to 5.5V. (8)Speed grades 0 to 8MHz. Those are all the main features.

Some ATTINY26L-8PU absolute maximum ratings have been concluded into several points as follow. (1)Its operating temperature range would be from 55°C to 125°C. (2)Its storage temperature range would be from -65°C to 150°C. (3)Its voltage on any pin except RESET with respect to ground would be from -0.5V to Vcc+0.5V. (4)Its voltage on RESET with respect to ground would be from -0.5V to 13V. (5)Its maximum operating voltage would be 6.0V. (6)Its DC current per I/O pin would be 40mA. (7)Its DC current Vcc and GND pins would be 200mA. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some ATTINY26L-8PU electrical characteristics are concluded as follow. (1)Its input low voltage except XTAL1 pin and RESET pins would be min -0.5V to 0.2Vcc. (2)Its input high voltage except XTAL1 pin and RESET pins would be min 0.6Vcc and max Vcc+0.5V. (3)Its output low voltage would be max 0.7V at Vcc=5V. (4)Its output high voltage would be min 4.2V at Vcc=5V. And so on. If you have any question or suggestion or want to know more information please contact us for details. Thank you!

Parameters:

Technical/Catalog Information	ATTINY26L-8PU
Vendor	Atmel
Category	Integrated Circuits (ICs)
Program Memory Size	2K x 8
RAM Size	128 x 8
Number of I /O	16
Package / Case	20-DIP
Speed	8MHz
Controller Series	ATtiny
Oscillator Type	Internal
Packaging	Tube
Program Memory Type	FLASH
EEPROM Size	128 x 8
Core Processor	AVR
Data Converters	A/D 11x10b
Core Size	8-Bit
Operating Temperature	-40°C ~ 85°C
Connectivity	USI
Peripherals	Brown-out Detect/Reset, POR, PWM, WDT
Voltage - Supply (Vcc/Vdd)	2.7 V ~ 5.5 V
Drawing Number	*
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	ATTINY26L 8PU ATTINY26L8PU