ATtiny2313V-10PU

Operating Temperature Range :
Data Bus Width : 8 bit
Operating Supply Voltage : 1.8 V to 5.5 V
Core : AVR
Mounting Style : Through Hole
Data RAM Size : 128 B
Package / Case : PDIP-20
On-Chip ADC : No
Program Memory Size : 2 KB
Maximum Clock Frequency : 10 MHz
Processor Series : ATTINY2x


Description

The ATTINY2313V-10PU is one member of the ATTINY2313 series.The ATtiny2313 is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATtiny2313 achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.

Features of the ATTINY2313V-10PU are:(1)120 powerful instructions - most single clock cycle execution; (2)32 x 8 general purpose working registers; (3)fully static operation; (4)up to 20 MIPS throughput at 20 MHz; (5)one 8-bit timer/counter with separate prescaler and compare mode; (6)one 16-bit timer/counter with separate prescaler, compare and capture modes; (7)four PWM Channels; (8)on-chip analog comparator; (9)programmable watchdog timer with on-chip oscillator; (10)USI - universal serial interface; (11)full duplex USART.The device is manufactured using Atmel's high density non-volatile memory technology.The On-chip ISP Flash allows the program memory to be reprogrammed In-System through an SPI serial interface, or by a conventional non-volatile memory programmer.By combining an 8-bit RISC CPU with In-System Self-Programmable Flash on a monolithic chip, the Atmel ATtiny2313 is a powerful microcontroller that provides a highly flexible and cost effective solution to many embedded control applications.

The absolute maximum ratings of the ATTINY2313V-10PU can be summarized as:(1)supply voltage:31.8 to 5.5V;(2)operation temperature:-40 to +85.The ATtiny2313 provides the following features: 2K bytes of In-System Programmable Flash, 128 bytes EEPROM, 128 bytes SRAM, 18 general purpose I/O lines, 32 general purpose working registers, a single-wire Interface for On-chip Debugging, two flexible Timer/Counters with compare modes, internal and external interrupts, a serial programmable USART, Universal Serial Interface with Start Condition Detector, a programmable Watchdog Timer with internal Oscillator, and three software selectable power saving modes. The Idle mode stops the CPU while allowing the SRAM, Timer/Counters, and interrupt system to continue functioning. The Power-down mode saves the register contents but freezes the Oscillator, disabling all other chip functions until the next interrupt or hardware reset.

Parameters:

Technical/Catalog Information	ATTINY2313V-10PU
Vendor	Atmel
Category	Integrated Circuits (ICs)
Program Memory Size	2K x 8
RAM Size	128 x 8
Number of I /O	18
Package / Case	20-DIP
Speed	10MHz
Controller Series	ATtiny
Oscillator Type	Internal
Packaging	Tube
Program Memory Type	FLASH
EEPROM Size	128 x 8
Core Processor	AVR
Data Converters	-
Core Size	8-Bit
Operating Temperature	-40°C ~ 85°C
Connectivity	SPI, UART/USART
Peripherals	Brown-out Detect/Reset, POR, PWM, WDT
Voltage - Supply (Vcc/Vdd)	1.8 V ~ 5.5 V
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	ATTINY2313V 10PU ATTINY2313V10PU