Features: • MPEG I/II-Layer 3 Hardwired Decoder
Stand-alone MP3 Decoder
48, 44.1, 32, 24, 22.05, 16 kHz Sampling Frequency
Separated Digital Volume Control on Left and Right Channels (Software Control using 31 Steps)
Bass, Medium, and Treble Control (31 Steps)
Bass Boost Sound Effect
Ancillary Data Extraction
CRC Error and MPEG Frame Synchronization Indicators
• 20-bit Stereo Audio DAC
93 dB SNR playback stereo channel
32 Ohm/ 20 mW stereo headset drivers
Stereo Line Level Input, Differential Mono Auxiliary Input
• Programmable Audio Output for Interfacing with External Audio System
PCM Format Compatible
I2S Format Compatible
• Mono Audio Power Amplifier
440mW on 8 Ohms Load
• 8-bit MCU C51 Core Based (FMAX = 20 MHz)
• 2304 Bytes of Internal RAM
• 64K Bytes of Code Memory
AT89C51SND2C: Flash (100K Erase/Write Cycles)
AT83SND2C: ROM
• 4K Bytes of Boot Flash Memory (AT89C51SND2C)
ISP: Download from USB (standard) or UART (option)
• USB Rev 1.1 Controller
Full Speed Data Transmission
• Built-in PLL
MP3 Audio Clocks
USB Clock
• MultiMedia Card® Interface Compatibility
• Atmel DataFlash® SPI Interface Compatibility
• IDE/ATAPI Interface
• Up to 32 Bits of General-purpose I/Os
1 Interrupt Keyboard
SmartMedia® Software Interface
• 2 Standard 16-bit Timers/Counters
• Hardware Watchdog Timer
• Standard Full Duplex UART with Baud Rate Generator
• Two Wire Master and Slave Modes Controller
• SPI Master and Slave Modes Controller
• Power Management
Power-on Reset
Software Programmable MCU Clock
Idle Mode, Power-down Mode
• Operating Conditions:
2.7 to 3.6V
37mA Typical Operating at 25°C playing music on earphone
Temperature Range: -40°C to +85°C
Power amplifier supply 3.2V to 5.5V
• Packages
CTBGA100
Application• MP3-Player
• PDA, Camera, Mobile Phone MP3
• Car Audio/Multimedia MP3
• Home Audio/Multimedia MP3Specifications
Storage Temperature ............................. -65 to +150°C
Voltage on any other Pin to VSS ............... -0.3 to +4.0 V
IOL per I/O Pin ....................................................... 5 mA
Power Dissipation.................................................... 1 W
Operating Conditions
Ambient Temperature Under Bias.............. -40 to +85°C
VDD .................................................................2.7 to 3.3V
|
*NOTICE: Stressing the device beyond the "Absolute Maximum Ratings" may cause permanent damage. These are stress ratings only.Operation beyond the"operating conditions" is not recommended and extended exposure beyond th"Operating Conditions" may affect device reliability. |
DescriptionThe AT8xC51SND2C has been developed for handling MP3 ringing tones in mobile phones and can replace sound generators while adding SD/MMC card reader, MP3 music decoding, and connection of the cell phone to a PC through USB. Cell phones can also be used as a thumb drive extending cell phone capabilities.
The AT8xC51SND2C are fully integrated stand-alone hardwired MPEG I/II-Layer 3 decoder with a C51 microcon-troller core handling data flow, MP3-player control, Stereo Audio DAC and Mono Audio Power Amplifier for speaker control.
The AT89C51SND2C includes 64K Bytes of Flash memory and allows In-System Programming through an embedded 4K Bytes of Boot Flash memory.
The AT83SND2C includes 64K Bytes of ROM memory.
The AT8xC51SND2C include 2304 Bytes of RAM memory.
The AT8xC51SND2C provides the necessary features for human interface like timers, keyboard port, serial or para-llel interface (USB, TWI, SPI, IDE), I2S output, and all external memory interface (NAND or NOR Flash, SmartMedia, MultiMedia, DataFlash cards).