Flash 512K x 8 90 ns 4.5V-5.5V
AT29C040A-90JU: Flash 512K x 8 90 ns 4.5V-5.5V
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: • Single Supply Voltage, Range 2.7V to 3.6V• Single Supply for Read and Writ...
Data Bus Width : | 8 bit | Memory Type : | NOR Flash | ||
Memory Size : | 512 K | Architecture : | Sectored | ||
Interface Type : | SPI | Access Time : | 90 ns | ||
Supply Voltage - Max : | 5.5 V | Supply Voltage - Min : | 4.5 V | ||
Maximum Operating Current : | 40 mA | Operating Temperature : | + 85 C | ||
Mounting Style : | SMD/SMT | Package / Case : | PLCC-32 |
The AT29C040A-90JU is designed as one kind of 5-volt only in-system Flash Programmable and Erasable Read Only Memory (PEROM) that offers access times up to 90 ns, and a low 220 mW power dissipation. Features of the are:(1)fast read access time - 90 ns; (2)5-volt only reprogramming; (3)sector program operation; (4)single cycle reprogram (erase and program); (5)2048 sectors (256 bytes/sector); (6)internal address and data latches for 256 bytes; (7)internal program control and timer; (8)hardware and software data protection; (9)two 16K bytes boot blocks with lockout; (10)fast sector program cycle time - 10 ms; (11)DATA polling for end of program detection; (12)low power dissipation; (13)40 mA active current; (14)100 uA CMOS standby current; (15)typical endurance > 10,000 cycles; (16)single 5V +/-10% supply; (17)green (Pb/Halide-free) packaging option.
The absolute maximum ratings of the AT29C040A-90JU can be summarized as:(1)Temperature Under Bias: -55°C to +125°C;(2)Storage Temperature: -65°C to +150°C;(3)All Input Voltages (including NC Pins) with Respect to Ground: -0.6 V to +6.25 V;(4)All Output Voltages with Respect to Ground: -0.6 V to VCC+0.6 V;(5)Voltage on OE with Respect to Ground: -0.6 V to +13.5 V.
The electrical characteristics of the AT29C040A-90JU can be summarized as:(1)Input Load Current: 10 A;(2)Output Leakage Current: 10 A;(3)VCC Standby Current CMOS: 300 A;(4)VCC Standby Current TTL: 3 mA;(5)VCC Active Current: 40 mA;(6)Input Low Voltage: 0.8 V;(7)Input High Voltage: 2.0 V;(8)Output Low Voltage: 0.45 V;(9)Output High Voltage: 2.4 V;(10)Output High Voltage CMOS: 4.2 V. If you want to know more information such as the electrical characteristics about AT29C040A-90JU, please download the datasheet in www.seekic.com or www.chinaicmart.com.
Technical/Catalog Information | AT29C040A-90JU |
Vendor | Atmel |
Category | Integrated Circuits (ICs) |
Memory Type | FLASH |
Memory Size | 4M (512K x 8) |
Speed | 90ns |
Interface | Parallel |
Package / Case | 32-PLCC |
Packaging | Tube |
Voltage - Supply | 4.5 V ~ 5.5 V |
Operating Temperature | -40°C ~ 85°C |
Format - Memory | FLASH |
Drawing Number | * |
Lead Free Status | Lead Free |
RoHS Status | RoHS Compliant |
Other Names | AT29C040A 90JU AT29C040A90JU |