DescriptionThe AT29C040 is a kind of 5-V only in-system flash programmable and erasable read only memory (PEROM). Its four megabit of memory is organized as 524,288 words by 8 bits. There are some features of AT29C040as follows: (1)fast read access time: 120 ns; (2)5-V only reprogramming; (3)sect...
AT29C040: DescriptionThe AT29C040 is a kind of 5-V only in-system flash programmable and erasable read only memory (PEROM). Its four megabit of memory is organized as 524,288 words by 8 bits. There are some ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: • Single Supply Voltage, Range 2.7V to 3.6V• Single Supply for Read and Writ...
The AT29C040 is a kind of 5-V only in-system flash programmable and erasable read only memory (PEROM). Its four megabit of memory is organized as 524,288 words by 8 bits.
There are some features of AT29C040 as follows: (1)fast read access time: 120 ns; (2)5-V only reprogramming; (3)sector program operation: single cycle reprogram (erase and program), 1024 sectors (512 bytes/sector) and internal address and data latches for 512 bytes; (4)internal program control and timer; (5)hardware and software data protection; (6)two 16KB boot blocks with lockout; (7)fast sector program cycle time: 10 ms; (8)DATA polling for end of program detection; (9)low power dissipation: 50 mA active current and 100A CMOS standby current; (10)typical endurance: >10000 cycles; (11)single 5 V±10% supply; (12)CMOS and TTL compatible inputs and outputs.
The following is about the maximum ratings of AT29C040: (1)temperature under bias: -55 to +125; (2)storage temperature: -65 to +150; (3)all input voltages (including N.C. pins) with respect to ground: -0.6 to +6.25 V; (4)all output voltages with respect to ground: -0.6 to VCC+0.6 V; (5)voltage on OE with respect to ground: -0.6 to +13.5 V.