Timing Type
:
Packaging
:
Access Time
: 90 ns
Memory Type
: NOR Flash
Architecture
: Sectored
Data Bus Width
: 8 bit
Operating Temperature
: + 70 C
Interface Type
: Parallel
Supply Voltage - Max
: 5.5 V
Supply Voltage - Min
: 4.5 V
Maximum Operating Current
: 50 mA
Mounting Style
: Through Hole
Package / Case
: PDIP-32
Memory Size
: 1 MB
Pinout
DescriptionThe AT29C010A-90PC is one member of the AT29C010A family which is designed as the 5-volt-only in-system Flash programmable and erasable read only memory (PEROM). AT29C010A-90PC has two designated memory blocks that have a programming lockout feature and provides another method for determining the end of a program or erase cycle. The hardware operation mode can be used by an external programmer to identify the correct programming algorithm for the Atmel product.
Features of the AT29C010A-90PC are:(1)DATA polling for end of program detection;(2)commercial and industrial temperature ranges;(3)fast sector program cycle time-10 ms;(4)CMOS and TTL compatible inputs and outputs;(5)low power dissipation:50 mA active current and 100 uA CMOS standby current;(6)typical endurance > 10,000 cycles;(7)single 5V ±10% supply;(8)two 8 KB boot blocks with lockout;(9)hardware and software data protection;(10)internal program control and timer;(11)fast read access time - 70 ns;(12)5-volt-only reprogramming.
The absolute maximum ratings of the AT29C010A-90PC can be summarized as:(1)temperature under bias:-55°C to +125°C;(2)storage temperature:-65°C to +150°C;(3)all input voltages (including NC pins) with respect to ground:-0.6V to +6.25V;(4)all output voltages with respect to ground:-0.6V to Vcc+0.6V;(5)voltage on OE with respect to ground:-0.6V to +13.5V.
The DC characteristics of the AT29C010A-90PC can be summarized as:(1)input load current:10 uA;(2)output leakage current:10 uA;(3)Vcc standby current CMOS (Com.):100 uA;(4)Vcc standby current CMOS (Ind.):300 uA;(5)Vcc standby current TTL:3 mA;(6)Vcc active current:50 mA;(7)input low voltage:0.8 V;(8)input high voltage:2.0 V;(9)output low voltage:.45 V;(10)output high voltage:2.4 V. If you want to know more information such as the electrical characteristics about the AT29C010A-90PC, please download the datasheet in www.seekic.com or www.chinaicmart.com.
Parameters: | Technical/Catalog Information | AT29C010A-90PC |
| Vendor | Atmel |
| Category | Integrated Circuits (ICs) |
| Memory Type | FLASH |
| Memory Size | 1M (128K x 8) |
| Speed | 90ns |
| Interface | Parallel |
| Package / Case | 32-DIP |
| Packaging | Tube |
| Voltage - Supply | 4.5 V ~ 5.5 V |
| Operating Temperature | 0°C ~ 70°C |
| Format - Memory | FLASH |
| Drawing Number | * |
| Lead Free Status | Contains Lead |
| RoHS Status | RoHS Non-Compliant |
| Other Names | AT29C010A 90PC
AT29C010A90PC
|
AT29C010A-90PC Data Sheet
