AT27LV020A-15JI

Series: -
Operating Temperature: -40°C ~ 85°C
Packaging: Tube
Memory Size: 2M (256K x 8)
Interface: Parallel
Package / Case: 32-LCC (J-Lead)
Supplier Device Package: 32-PLCC
Manufacturer: Atmel
Format - Memory: EPROMs
Memory Type: EPROM OTP
Voltage - Supply: 3 V ~ 3.6 V, 4.5 V ~ 5.5 V
Speed: 150ns


Features:

• Fast Read Access Time - 90 ns
• Dual Voltage Range Operation Low Voltage Power Supply Range, 3.0V to 3.6V or Standard 5V ± 10% Supply Range
• Compatible with JEDEC Standard AT27C020
• Low Power CMOS Operation
  20 A max. (less than 1 A typical) Standby for V_CC = 3.6V
  29 mW max. Active at 5 MHz for V_CC = 3.6V
• JEDEC Standard Packages
  32-Lead PLCC
  32-Lead TSOP (8 X 20 mm)
  32-Lead VSOP (8 x 14 mm)
• High Reliability CMOS Technology
  2,000V ESD Protection
  200 mA Latchup Immunity
• Rapid™Programming Algorithm - 100 s/byte (typical)
• Two-Line Control
• CMOS and TTL Compatible Inputs and Outputs JEDEC Standard for LVTTL
• Integrated Product Identification Code
• Commercial and Industrial Temperature Ranges


Pinout




Specifications

Temperature Under Bias .................................. -40to +85
Storage Temperature ..................................... -65 to +125
Voltage on Any Pin with
Respect to Ground........................................ -2.0V to +7.0V ⁽¹⁾
Voltage on A9 with
Respect to Ground ..................................... -2.0V to +14.0V ⁽¹⁾
V_PP Supply Voltage with
Respect to Ground......................................-2.0V to +14.0V ⁽¹⁾

*NOTICE: Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

Note: 1. Minimum voltage is -0.6V dc which may undershoot to -2.0V for pulses of less than 20 ns.Maximum output pin voltage is V_CC + 0.75V dc which may be exceeded if certain precautions are observed (consult application notes) and which may overshoot to +7.0 volts for pulses of less than 20 ns.

Description

The AT27LV020A-15JI is a high performance, low power, low voltage 2,097,152 bit onetime programmable read only memory (OTP EPROM) organized as 256K by 8 bits. The AT27LV020A-15JI requires only one supply in the range of 3.0 to 3.6V in normal read mode operation, making it ideal for fast, portable systems using battery power.

Parameters:

Technical/Catalog Information	AT27LV020A-15JI
Vendor	Atmel
Category	Integrated Circuits (ICs)
Memory Type	OTP EPROM
Memory Size	2M (256K x 8)
Speed	150ns
Interface	Parallel
Package / Case	32-PLCC
Packaging	Tube
Voltage - Supply	3 V ~ 3.6 V, 4.5 V ~ 5.5 V
Operating Temperature	-40°C ~ 85°C
Format - Memory	EPROMs
Drawing Number	*
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	AT27LV020A 15JI AT27LV020A15JI