Features: FCC approved method of EMI attenuation.Generates a low EMI spread spectrum of the input clock frequency.Optimized for input frequency range between 35MHz 55MHz.Internal loop filter minimizes external components and board space.Frequency Deviation: ±1.65%.Low inherent cycle-to-cycle jitt...
ASM3P2531A: Features: FCC approved method of EMI attenuation.Generates a low EMI spread spectrum of the input clock frequency.Optimized for input frequency range between 35MHz 55MHz.Internal loop filter minimi...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol | Parameter | Rating | UNIT |
VDD, VIN | Voltage on any pin with respect to GND | -0.5 to +7.0 | V |
TSTG | Storage temperature | -65 to +125 | ° C |
TA | Operating temperature | 0 to +70 | ° C |
The ASM3P2531A is a versatile spread spectrum frequency modulator designed specifically for a wide range of clock frequencies. It reduces electromagnetic interference (EMI) at the clock source allowing systemwide reduction of EMI of downstream clock and data dependent signals. It allows significant system cost savings by reducing the number of circuit board layers and shielding traditionally required to pass EMI regulations.
The ASM3P2531A modulates the output of a single PLL in order to spread the bandwidth of a synthesized clock, thereby decreasing the peak amplitudes of its harmonics. This results in significantly lower system EMI compared to the typical narrow band signal produced by oscillators and most clock generators. Lowering EMI by increasing a signal's bandwidth is called spread spectrum clock generation.
The ASM3P2531A uses the most efficient and optimized modulation profile approved by the FCC and is implemented by using a proprietary all-digital method.