Features: SpecificationsDescriptionThe features of AS5156 are 4.5mA typical operating current, <1A Typical Standby Current, Low External Parts Count, Optional Current Limit (35mV Typical Threshold) , 1% Initial Output Voltage Tolerance In Most Configurations, 2% Output Voltage Tolerance Over Te...
AS5156: Features: SpecificationsDescriptionThe features of AS5156 are 4.5mA typical operating current, <1A Typical Standby Current, Low External Parts Count, Optional Current Limit (35mV Typical Threshol...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The features of AS5156 are 4.5mA typical operating current, <1A Typical Standby Current, Low External Parts Count, Optional Current Limit (35mV Typical Threshold) , 1% Initial Output Voltage Tolerance In Most Configurations, 2% Output Voltage Tolerance Over Temperature, Programmable (1.3 to 36V) With Two Resistors (AS5156), Internal Gate-To Source Protective Clamp, All Versions Available in SOIC and Dip. And the AS5156 can be applicated in Ultra-High Current Ultra-Low Dropout Voltage Regulators, Constant High-Current Source, Low Parts Count for 5.0V and 3.3V Computer Supply, Low Noise/Low-Dropout SMPS Post Regulator, High-Current, Current-Limited Switch, Monitors/VCR/TV.
The ALPHA Semiconductor AS5156 contains a single IC solution for a high-current low-dropout linear voltage regulation. Using an advantageous transistor as an N-Channel power MOSFET as the linear pass element. The AS5156 features a low dropout voltage that is enhanced by the external power MOSFET. The lowest possible dropout voltage becomes the MOSFET RDS (ON) multiplied by the source drain current of the same MOSFET. The output current is only limited by the safe power handling capacity of the MOSFET. The AS5156 operates from 3V to 36V. An external gate of that same MOSFET gate drive supply is required by the AS5156 to provide the higher voltage needed to drive the gate of the external MOSFET. When the controller detects 35mV across an optional external sense resistor the regulator output is constant current limited. The AS5156 activates its flag to indicate a-low voltage of 8% or more below nominal output. A shutdown sigal to the enable control reduces controller by supply current to less than 1A and forces the output voltage to ground. The AS5156-3.3 and AS5156-5.0 controllers have internally fixed output voltages. The AS5l56 [adjustable] output is configured using two external resistors. The AS5156 is available in 8-Pin SOIC or a plastic Dip.
The absolute maximum ratings of AS5156 are supply voltage 38V, enable(input) -0.3 to 36 V, voltage gate 55V, voltage source 1.3 to 36 V, flag. -0.3 to 40 V, operating junction temperature 150, ambient temperature rang -40 to 85 , storage temperature -65 to 150, lead temperature 300.