Features: Detects even slight motion of a person (e.g. a 20 cm 7.87 inch movement of the hand) With our unique motion detector-highly sensitive type, even slight motions made by people will be detected easily.• Compact lens We have decreased the exposed portion of the lens, and at the same t...
AMP Series: Features: Detects even slight motion of a person (e.g. a 20 cm 7.87 inch movement of the hand) With our unique motion detector-highly sensitive type, even slight motions made by people will be detec...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Detects even slight motion of a person (e.g. a 20 cm 7.87 inch movement of the hand) With our unique motion detector-highly sensitive type, even slight motions made by people will be detected easily.
• Compact lens We have decreased the exposed portion of the lens, and at the same time maintained a detection ability that is as good or better than other motion sensors on the market. Lens dimensions: Standard sensitive type 16´20 mm .630´.787 inch TYPES PERFORMANCE Highly sensitive type 24´24 mm .945´.945 inch
• High detection ability This sensor is a stable, sensitive sensor that detects 2°C 3.6°F temperature changes regardless of the location or speed of the subject. In other words, this sensor ensures detection whether a person is at the edge of the detection area or in the middle, regardless of how fast they are moving.
• Low current consumption The standard model consumes 260 A (during stand-by), while the low consumption current type consumes 30 A (during stand-by). This makes battery operation possible.
• Wide operation voltage range (2.6 to 5.5 V DC) The usable range extends from a standard 5 V DC for microcomputers to 3 V DC and 4.5 V DC for battery operation.
• Varied operation in accordance with the surrouding brightness If used together with a brightness sensor (CdS), you can make the sensor operate only during bright hours or dark hours.
• Output time can easily be changed By simply changing the resistor attached to the outside of the sensor, the output time can be changed from approximately 10 seconds to 6 minutes.