AM29F160DT-90EI

Memory Type :
Interface Type :
Timing Type : Asynchronous
Mounting Style : SMD/SMT
Package / Case : TSOP-48
Packaging : Tray
Operating Temperature : - 40 C to + 85 C
Access Time : 90 ns
Memory Size : 16 Mbit
Supply Voltage - Max : 5.5 V
Supply Voltage - Min : 4.5 V
Maximum Operating Current : 50 mA
Architecture : Boot Sector
Data Bus Width : 8 bit, 16 bit


Description

The AM29F160DT-90EI is designed as one kind of 8 megabit (1 M x 8-bit/512 K x 16-bit) CMOS 5.0 volt-only, boot sector flash memory that is organized as 1,048,576 bytes or 524,288 words. This device is producted by the AMD company and is manufactured using AMD's 0.35 m process technology. Also it is entirely command set compatible with the JEDEC single-power-supply Flash standard.

Features of the AM29F160DT-90EI are:(1)Single power supply operation: 5.0 Volt-only operation for read, erase, and program operations, and Minimizes system level requirements;(2)Manufactured on 0.35 m process technology: Compatible with 0.5 m Am29F800 device;(3)High performance: Access times as fast as 55 ns;(4)Hardware method to reset the device to reading array data;(5)Provides a hardware method of detecting program or erase cycle completion;(6)Minimum 1,000,000 program/erase cycles per sector guaranteed;(7)Top or bottom boot block configurations available;(8)Package option: 48-pin TSOP and 44-pin SO;(9)Superior inadvertent write protection;(10)Data# Polling and toggle bits: Provides a software method of detecting program or erase operation completion.

The absolute maximum ratings of the AM29F160DT-90EI can be summarized as:(1)Storage Temperature Plastic Packages:65°C to +150°C;(2)Ambient Temperature with Power Applied:55°C to +125°C;(3)Voltage with Respect to Ground Vcc: -2.0 V to +7.0;(4)Voltage with Respect to Ground A9, OE#, and RESET#: -2.0 V to +12.5 V;(5)Output Short Circuit Current: 200 mA.

The electrical characteristics of AM29F160DT-90EI can be summarized as:(1)Input Load Current: ±1.0 A;(2)A9 Input Load Current: 35 A;(3)Output Leakage Current: ±1.0 A;(4)VCC Active Read Current: 19 to 40 mA;(5)VCC Active Write Current: 36 to 60 mA;(6)VCC Standby Current: 0.4 to 1 mA;(7)Input Low Voltage: 0.5 to 0.8 V;(8)Input High Voltage: 2.0 to VCC+0.5 V;(9)Voltage for Autoselect and Temporary Sector Unprotect: 11.5 to 12.5 V;(10)Output Low Voltage: 0.45 V. If you want to know more information about it, please download the datasheet in www.seekic.com or www.chinaicmart.com .