Pinout
DescriptionThe AM29F160DT-120EI is designed as one kind of 16 megabit (2 M x 8 bit/1 M x 16-bit) CMOS 5.0 volt-only, boot sector flash memory that is organized as 2,097,152 bytes or 1,048,576 words. This device offers access times of 70, 90, and 120 ns, allowing high speed micro-processors to operate without wait states, and is offered in a 48-pin TSOP package.
Features of the AM29F160DT-120EI are:(1)Single power supply operation: 5.0 Volt-only operation for read, erase, and program operations, and Minimizes system level requirements;(2)Manufactured on 0.25 m process technology;(3)Ultra low power consumption (typical values at 5 MHz): 15 mA typical active read current, 35 mA typical erase/program current and 300 nA typical standby mode current;(4)Hardware method to reset the device to reading array data;(5)Provides a hardware method of detecting program or erase cycle completion;(6)Minimum 1,000,000 program/erase cycles per sector guaranteed;(7)Sectors can be locked in-system or via programming equipment;(8)Package option: 48-pin TSOP and 44-pin SO;(9)Temporary Sector Unprotect feature allows code changes in previously locked sectors;(10)One 8 Kword, two 4 Kword, one 16 Kword, and thirty-one 32 Kword sectors (word mode);(11)One 16 Kbyte, two 8 Kbyte, one 32 Kbyte, and thirty-one 64 Kbyte sectors (byte mode).
The absolute maximum ratings of the AM29F160DT-120EI can be summarized as:(1)Storage Temperature Plastic Packages:65°C to +150°C;(2)Ambient Temperature with Power Applied:55°C to +125°C;(3)Voltage with Respect to Ground Vcc: -2.0 V to +7.0;(4)Voltage with Respect to Ground A9, OE#, and RESET#: -2.0 V to +12.5 V;(5)Output Short Circuit Current: 200 mA.
The electrical characteristics of this device can be summarized as:(1)Input Load Current: ±1.0 A;(2)A9 Input Load Current: 35 A;(3)Output Leakage Current: ±1.0 A;(4)VCC Active Read Current: 19 to 40 mA;(5)VCC Active Write Current: 36 to 60 mA;(6)VCC Standby Current: 0.4 to 1 mA;(7)Input Low Voltage: 0.5 to 0.8 V;(8)Input High Voltage: 2.0 to VCC+0.5 V;(9)Voltage for Autoselect and Temporary Sector Unprotect: 11.5 to 12.5 V;(10)Output Low Voltage: 0.45 V. If you want to know more information about the AM29F160DT-120EI, please download the datasheet in www.seekic.com or www.chinaicmart.com .
AM29F160DT-120EI Data Sheet
