AM26LV32CDR

Interface Type :
Logic Family :
Number of Receivers : 4
Receiver Signal Type : Differential
Operating Supply Voltage : 3.3 V
Maximum Operating Temperature : + 85 C
Minimum Operating Temperature : - 40 C
Package / Case : SOIC-16
Packaging : Reel


Description

The AM26LV32CDR is one member of the AM26LV32 family which is designed as the low-voltage high-speed quadruple differential line receiver that is optimized for balanced bus transmission at switching rates up to 32 MHz. This device features receiver high input impedance and input hysteresis for increased noise immunity, and input sensitivity of ±200 mV over a common-mode input voltage range from 0.3 V to 5.5 V.

Features of the AM26LV32CDR are:(1)switching rates up to 32 MHz; (2)operates from a single 3.3-V supply; (3)ultra-low power dissipation: 27 mW typ; (4)open-circuit, short-circuit, and terminated fail-safe; (5)-0.3-V to 5.5-V common-mode range with +/-200 mV sensitivity; (6)accepts 5-v logic inputs with a 3.3-V VCC; (7)input hysteresis: 50 mV typ; (8)235 mw with four receivers at 32 MHz; (9)pin-to-pin compatible with AM26C32, AM26LS32, and MB570.

The absolute maximum ratings of the AM26LV32CDR can be summarized as:(1)Supply voltage range, VCC: -0.3 V to 6 V;(2)Input voltage range, VI (A or B inputs): -4 V to 8 V;(3)Differential input voltage: ±12 V;(4)Enable input voltage range:0.3 V to 6 V;(5)Output voltage range, VO:0.3 V to 6 V;(6)Maximum output current: ±25 mA;(7)Package thermal impedance D package: 73°C/W;(8)Package thermal impedance NS package: 64°C/W;(9)Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: 260°C;(10)Storage temperature range:65°C to 150°C. If you want to know more information such as the electrical characteristics about it, please download the datasheet in www.seekic.com or www.chinaicmart.com .

Parameters:

Technical/Catalog Information	AM26LV32CDR
Vendor	Texas Instruments (VA)
Category	Integrated Circuits (ICs)
Number of Drivers/Receivers	0/4
Type	Line Receiver
Voltage - Supply	3 V ~ 3.6 V
Package / Case	16-SOIC (3.9mm Width)
Packaging	Cut Tape (CT)
Protocol	RS422
Drawing Number	296; 4040047-4; D; 16
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	AM26LV32CDR AM26LV32CDR 296 6794 1 ND 29667941ND 296-6794-1