ALD1704

Features:

* Rail-to-rail input and output voltage ranges
* 5.0V/s slew rate
* Output settles to 2mV of supply rails
* High capacitive load capability -- up to 4000pF
* Symmetrical push-pull output drives
* No frequency compensation required --unity gain stable
* Extremely low input bias currents -- 1.0pA typical (20pAMax)
* Ideal for high source impedance applications
* High voltage gain -- typically 150V/mV
* Output short circuit protected
* Unity gain bandwidth of 2.1MHz


Application

* Voltage amplifier
* Voltage follower/buffer
* Charge integrator
* Photodiode amplifier
* Data acquisition systems
* High performance portable instruments
* Signal conditioning circuits
* Low leakage amplifiers
* Active filters
* Sample/Hold amplifier
* Picoammeter
* Current to voltage converter
* Coaxial cable driver
* Capacitive sensor amplifier
* Piezoelectric transducer amplifier


Pinout




Specifications

Supply voltage, V⁺                                                                             13.2V
Differential input voltage range                                       -0.3V to V⁺ +0.3V 
Power dissipation                                                                          600 mW
Operating temperature range PA, SA package                   0°C to +70°C
DA package                                                                    -55°C to +125°C
Storage temperature range                                           -65°C to +150°C
Lead temperature, 10 seconds                                                      +260°C


Description

The ALD1704 is a CMOS monolithic operational amplifier with MOSFET input  that has rail-to-rail input and output voltage ranges.  The input voltage range and output voltage range are very close to the positive and negative power supply voltages.  Typically the input voltage can be beyond positive power supply voltage V+, or the negative power supply voltage V- by up to 300mV.  The output voltage swings to within 60mV of either positive or negative power supply voltages at rated load.

ALD1704 is designed as an alternative to the popular JFET input operational amplifiers in applications where lower operating voltages, such as 9V battery or ±3.25V to ±6V power supplies are being used.  It offers high slew rate of 5V/s at low operating power of 30mW.  Since the ALD1704 is designed and manufactured  with Advanced Linear Devices' standard enhanced ACMOS silicon gate CMOS process, it also offers low unit cost and exceptional reliability.