AL5DS9349V

A Dual-port RAM is a static RAM with a dual-ported cell. There are separate address, data and control signals for each port to access a common SRAM array. A dual-port RAM is generally classified with FIFOs as a "specialty" memory. AL5DS9xx9V are most commonly used in communications that include the exchange of data between processors, processes and systems.

Each port of AL5DS9xx9V contains an internal counter for fast memory access applications. The initial address of the internal counter is loaded with the port's Address Strobe (/ADS). It also allows the Counter Enable (/CNTEN) to increment the internal counter on each Low to High transition of that port's clock signal. The counter can address the entire memory array and will loop back to start (address 0). The internal counter will be reset to zero while asserting Counter Reset (/CNTRST).

The AL5DS9xx9V is a high speed, 3.3V, synchronous, CMOS, dual-ported SRAM series. The AL5DS9xx9V are configured as 4K/8K/16K/32K/64K x 18-bit,AL5DS9269V/79V/89V as 16K/32K/64K x 16-bit, AL5DS9xx9V as 8K/16K/32K/64K/128K x 9-bit and 16K/32K/64K/128 x 8-bit. All these parts support both Pipelined and Flow-Through modes that are selected via the Pipe/FT pin. In the Pipelined mode, two cycles are required to reactivate the data outputs. The AL5DS9xx9V series features dual Chip Enables that allow simple depth and width expansion without external control logic.

All parts are available in 100-pin Thin Quad Plastic Flatpack (TQFP) packages.AL5DS9xx9Vare also available in 128-pin TQFP packages. For more information regarding AL5DS9xx9V synchronous Dual-Port RAM or other AverLogic products, please contact us at your local authorized representatives or visit our web site listed below.