Features: • Bipolar Hall Effect Latch Sensor• 3.5V to 20V DC Operation Voltage• Open Collector Pre-Driver• 50mA Output Sink Current• Chip Power Reverse-Connection Protection• Operating Temperature: -40~125• Package: SIP3• SIP3: Available in Green M...
AH1751: Features: • Bipolar Hall Effect Latch Sensor• 3.5V to 20V DC Operation Voltage• Open Collector Pre-Driver• 50mA Output Sink Current• Chip Power Reverse-Connection Prote...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Part Number | AH1751 |
Description | Single Hall Effect Latch |
process | Bipolar |
Operating Voltage (V) | 3.5 ~ 20 |
Output Current (Ave) | 50mA |
Operating Point Bop (Gauss) | 5/70 |
Release Point Brp (Gauss) | -70/-5 |
Operating Ambient Temp Range (°C) | -40 to +125 |
Symbol | Parameter | Rating | Unit |
VCC Vout (off) Io (sink) |
Supply Voltage Output "OFF " Voltage Output "ON" Current |
20 20 100 |
V V mA |
TA TST |
Operating Temperature Range Storage Temperature Range |
-40~+125 -65~+150 |
|
TJ(MAX) PD |
Maximum Junction Temperature Power Dissipation |
+150 550 |
mW |
AH1751 is a single-digital-output Hall-effect sensor for high temperature operation. The AH1751 includes an on-chip Hall voltage generator for magnetic sensing, an amplifier to amplify Hall voltage, and a comparator to provide switching hysteresis for noise rejection, and an open-collector output pre-driver. An internal band-gap regulator is used to provide temperature compensated supply voltage for internal circuits and allows a wide operating supply range.
While the magnetic flux density (B) is larger than threshold Bop, the OUT pin turns on (low). If B removed toward Brp, the OUT pin of AH1751 is latched "on" state prior to B < Brp. When B < Brp, the OUT pin go into " off " state.