Features: Bipolar Hall effect latch sensor 3V to 20V DC operation voltage Built-in pull-up resistor 25mA output sink current Operating temperature: −40°C ~ +125°C Package: SIP3, SOT23Application Rotor position sensing Current switch Encoder RPM detectionPinoutSpecifications Characteris...
AH173: Features: Bipolar Hall effect latch sensor 3V to 20V DC operation voltage Built-in pull-up resistor 25mA output sink current Operating temperature: −40°C ~ +125°C Package: SIP3, SOT23Applicat...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Characteristics |
Symbol |
Rating |
Unit | |
Supply voltage |
Vcc |
20 |
V | |
Output "off " voltage |
V out (off) |
20 |
V | |
Output "on" current |
I o (sink) |
25 |
mA | |
Power Dissipation |
PD |
SIP |
550 |
mW |
SOT23 |
800 | |||
Operating temperature range |
Topr |
-40 ~ 125 |
°C | |
Storage temperature range |
Tstg |
-65~ 150 |
°C |
Part Number | AH173 |
Description | High Temp Single Hall Effect Latch |
process | Bipolar |
Operating Voltage (V) | 3 ~ 20 |
Output Current (Ave) | 25mA |
Operating Point Bop (Gauss) | 15/60 5/80 |
Release Point Brp (Gauss) | -60/-15 -80/-5 |
Operating Ambient Temp Range (°C) | -40 to +125 |
AH173 is a single-digital-output Hall-effect sensor with pull-up resistor for high temperature operation.The AH173 includes an on-chip Hall voltage generator for magnetic sensing, an amplifier to amplify Hall voltage, and a comparator to provide switching hysteresis for noise rejection, and an output driver with a pull-up resistor (Rpu).
An internal bandgap regulator is used to provide temperature compensated supply voltage for internal circuits and allows a wide operating supply range in AH173. While the magnetic flux density (B) is larger than operate point (Bop), the OUT pin turns on (low). If B moves toward release point (Brp), the OUT pin is latched "on" state prior to B < Brp. When B < Brp, the OUT pin go into " off " state.