AH-70-1

Features:






Specifications






Description

      This is the description about AH-70-1 of the 10 to 500 MHz, TO-8 cascadable Amplifer.
      The electrical specifications of AH-70-1 are these, measured in a 50 ohm system at 15 Vdc nominal. The Frequency (MHZ Min) is 5-300 (typical), 5 to 250 (guaranteed), 10 to 250 (specifications). The small signal gain (dB Min) is 8.0 (typical), 7.5 (guaranteed), 7 (specifications). The gain flatness (dB Max) is ±0.3 (typical), ±0.5 (guaranteed), ±0.7 (specifications). The noise figure (dB Max) is 1.4 (typical), 2.0 (guaranteed), 2.4 (specifications). The power output @ 1dB compression (dB Min) is 14.3 (typical), 12 (guaranteed), 11.5 (specifications). The two tone 3rd order intercept point (dB Min) is 31.0 (typical), 28.0 (guaranteed), 27.0 (specifications). The two tone 2nd order intercept point (dB Min) is 45 (typical), 42 (guaranteed), 42 (specifications). The one tone 2nd order harmonic intercept point (dB Min) is 52 (typical), 48 (guaranteed), 48 (specifications). The input VSWR is 1.3:1 (typical), 1.8:1 (guaranteed), 1.9:1 (specifications). The output VSWR is 1.3:1 (typical), 1.8:1 (guaranteed), 1.9:1 (specifications). The DC current at 5V (mA Max.) is 14.0 (typical), 17.0 (guaranteed), 18.0 (specifications). The ambient operating temperature is from -54°C to 100°C. The storage temperature is from -62°C to 125°C. The maximum case temperature is 125°C . The maximum DC voltage is 18.0V. The maximum continuous RF input power is 13 dBm. The maximum short term RF input power is 50.0 mV (one minute Max.).
      At present there is not too much information about AH-70-1. If you are willing to find more about the AH-70-1, please pay attention to our web! We will promptly update the relevant information. You can find it in www.ChinaICMart.com or www.seekic.com. Welcome to contact with us.