AH-511

Features:






Specifications






Description

      This is the description about AH-511 of the 10 to 1000 MHz, TO-8 cascadable Amplifer.
      Here are the features of AH-511 . The high gain is 16.5 dB.  The low noise is 2.5 dB.
    The absolute Maximum Ratings and electrical specifications of AH-511 are these, measured in a 50 ohm system at 15 Vdc nominal. The Frequency (MHZ Min) is from 10 to 1000 (typical) and is from 10 to 1000 (guaranteed) and is from 10 to 1000 (specifications). The small signal gain (dB Min) is 16.5 (typical), 16 (guaranteed), 15 (specifications). The gain flatness (dB Max) is ±0. 5 (typical), ±1 (guaranteed), ±1.0 (specifications). The noise figure (dB Max) is 2.5 (typical), 3 (guaranteed), 3 (specifications). The power output @ 1dB compression (dB Min) is -0.3 (typical) and is -2.0 (guaranteed) and is -3.0 (specifications). The two tone 3rd order intercept point (dB Min) is 12.0 (typical), 9.0 (guaranteed), 8.0 (specifications). The two tone 2nd order intercept point (dB Min) is 21 (typical), 19(guaranteed), 18 (specifications). The two tone 2nd harmonic intercept point (dB Min) is 26 (typical), 24(guaranteed), 22 (specifications). The input VSWR is 1.8:1 (typical), 2.0:1 (guaranteed), 2.0:1 (specifications). The output VSWR is 1.8:1 (typical), 2.0:1 (guaranteed), 2.0:1 (specifications). The DC current at 15V (mA Max.) is 9.0 (typical), 12.0 (guaranteed), 15.0 (specifications). The ambient operating temperature is from -54°C to 100°C. The storage temperature is from -62°C to 125°C. The maximum case temperature is 125°C . The maximum DC voltage is 18.0V. The maximum continuous RF input power is 13 dBm. The maximum short term RF input power is 50.0 mV (one minute Max.).
      At present there is not too much information about AH-511. If you are willing to find more about the AH-511, please pay attention to our web! We will promptly update the relevant information. You can find it in www.ChinaICMart.com or www.seekic.com. Welcome to contact with us.