Features: · 14-bit resolution· 5MHz minimum sampling rate· No missing codes over full military temperature range· Edge-triggered, no pipeline delay· Low power, 2.95 Watts· Small, 32-pin, ceramic TDIP package· SMT package available· Excellent dynamic performance· MIL-STD-883 screening or DESC SMD a...
ADS-944: Features: · 14-bit resolution· 5MHz minimum sampling rate· No missing codes over full military temperature range· Edge-triggered, no pipeline delay· Low power, 2.95 Watts· Small, 32-pin, ceramic TDI...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
PARAMETERS | LIMITS | UNITS |
+12V/+15V Supply (Pin 22) | 0 to +16 | Volts |
12V/15V Supply (Pin 24) | 0 to 16 | Volts |
+5V Supply (Pin 13) | 0 to +6 | Volts |
5V Supply (Pin 2, 14) | 0 to 6 | |
Digital Input (Pin 16) | 0.3 to +VDD +0.3 | Volts |
Analog Input (Pin 3) |
±15 | Volts |
Lead Temperature (10 seconds) | +300 | °C |
The low-cost ADS-944 is a high-performance, 14-bit, 5MHz sampling A/D converter. This device accurately samples fullscale input signals up to Nyquist frequencies with no missing codes. The dynamic performance of the ADS-944 has been optimized to achieve a THD of 77dB and a SNR of 76dB. Packaged in a small, 32-pin TDIP, the functionally complete ADS-944 contains a fast-settling sample-hold amplifier, a subranging (two-pass) A/D converter, an internal reference, timing and control logic, three-state outputs, and errorcorrection circuitry. Digital input and output levels are TTL.
Requiring ±15V, +5V and 5.2V supplies, the ADS-944 typically dissipates 2.95 Watts. The unit is offered with a bipolar input range of ±1.25V. Models are available for use in either commercial (0 to +70°C) or military (55 to +125°C) operating temperature ranges. Typical applications include radar signal analysis, medical/graphic imaging, and FFT spectrum analysis.