ADG713

V_DD to GND . . . . . . . . . . . . . . . . . . . . . . . . . . .0.3 V to +6 V
Analog, Digital Inputs2 . . . . . . . . . . .0.3 V to V_DD +0.3 V or
30 mA, Whichever Occurs First
Continuous Current, S or D . . . . . . . . . . . . . . . . . . . . 30 mA
Peak Current, S or D . . . . . . . . . . . . . . . . . . . . . . . . .100 mA
(Pulsed at 1 ms, 10% Duty Cycle max)
Operating Temperature Range
Industrial (B Version) . . . . . . . . . . . . . . . 40°C to +85°C
Storage Temperature Range . . . . . . . . .65°C to +150°C
Junction Temperature . . . . . . . . . . . . . . . . . . . . . . .+150°C
TSSOP Package, Power Dissipation . . . . . . . . . . . . .430 mW
_JA Thermal Impedance . . . . . . . . . . . . . . . . . . . . 150°C/W
_JC Thermal Impedance . . . . . . . . . . . . . . . . . . . . . 27°C/W
SOIC Package, Power Dissipation . . . . . . . . . . . . . .520 mW
_JA Thermal Impedance . . . . . . . . . . . . . . . . . . . . 125°C/W
_JC Thermal Impedance . . . . . . . . . . . . . . . . . . . . .42°C/W
Lead Temperature, Soldering
Vapor Phase (60 sec) . . . . . . . . . . . . . . . . . . . . . . .+215°C
Infrared (15 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . +220°C
ESD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 kV
NOTES
¹Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those listed in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Only one absolute maximum rating may be applied at any one time.
²Overvoltages at IN, S or D will be clamped by internal diodes. Current should be limited to the maximum ratings given.

The ADG711/ADG712/ADG713 are monolithic CMOS devices containing four independently selectable switches. ADG711/ADG712/ADG713 switches are designed on an advanced submicron process that provides low power dissipation yet gives high switching speed, low on resistance, low leakage currents and high bandwidth.

ADG711/ADG712/ADG713 are designed to operate from a single +1.8 V to +5.5 V supply, making them ideal for use in battery powered instruments and with the new generation of DACs and ADCs from Analog Devices. Fast switching times and high bandwidth make the part suitable for video signal switching.

ADG711/ADG712/ADG713contain four independent single-pole/single throw (SPST) switches. The products differ only in that the digital control logic is inverted.

The product switches are turned on with a logic low on the appropriate control input, while a logic high is required to turn on the switches of the product. The product contains two switches whose digital control logic is similar to the product, while the logic is inverted on the other two switches.

Each switch conducts equally well in both directions when ON. The product exhibits break-before-make switching action. The ADG711/ADG712/ADG713 are available in 16-lead TSSOP and 16-lead SOIC packages.