ADG604

1 pC Charge Injection (Over the Full Signal Range)2.7 V to 5.5 V Dual Supply
2.7 V to 5.5 V Single Supply
Automotive Temperature Range: 40C to +125C
100 pA Max @ 25C Leakage Currents
85  Typ On Resistance
Rail-to-Rail Operation
Fast Switching Times
Typical Power Consumption (<0.1 W)
TTL/CMOS Compatible Inputs
14-Lead TSSOP Package

Automatic Test Equipment
Data Acquisition Systems
Battery-Powered Instruments
Communication Systems
Sample and Hold Systems
Remote-Powered Equipment
Audio and Video Signal Routing
Relay Replacement
Avionics

V_DD to V_SS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... . . 13 V
V_DD to G_ND  . . . . . . . . . . . . . . . . . . . . . . ...... .  0.3 V to +6.5 V
V_SS to G_ND . . . . . . . . . . . . . . . . . . . . . . ...... . .  +0.3 V to 6.5 V
Analog Inputs²  . . . . . . . . . . . . . . . . VSS 0.3 V to VDD + 0.3 V
Digital Inputs²  . . . . . . . . . . . . ... . . . . 0.3 V to VDD + 0.3 V or
 . . . . . . . . . . . . . . . . . . . . . ......... 30 mA, Whichever Occurs First
Peak Current, S or D . . . . . . . . . . . . . . . . . . . . . . . ..... . .  20 mA
   (Pulsed at 1 ms, 10% Duty Cycle Max)
Continuous Current, S or D  . . . . . . . . . . . . . . . . ...... . . .  10 mA
Operating Temperature Range.
   Automotive (Y Version)  . . . . . . . . . . . .. . . 40°C to +125°C
Storage Temperature Range  . . . . . . . . . .. . 65°C to +150°C

Junction Temperature  . . . . . . . . . . . . . . . . . ... . . . . . . .  150°C
TSSOP Package
   _JA Thermal Impedance  . . . . . . . . . . . . . . . . . . ..... .  150°C/W
   _JC Thermal Impedance  . . . . . . . . . . . . . . . . . ..... . . .  27°C/W
Lead Temperature, Soldering (10 seconds) . . . .. . . .. .. .  300°C
   IR Reflow, Peak Temperature  . . . . . . . . . . . . ..... .. . . .  220°C

The ADG604 is a CMOS analog multiplexer, comprising four single channels. It operates from a dual supply of ±2.7 V to ±5.5 V, or from a single supply of 2.7 V to 5.5 V.

The ADG604 switches one of four inputs to a common output,D, as determined by the 3-bit binary address lines, A0, A1, and EN. A Logic "0" on the EN pin disables the device.

The ADG604 offers ultralow charge injection of ±1.5 pC over the entire signal range and leakage currents of 10 pA typical at 25°C. It offers on resistance of 85  typ, which is matched to within 2 between channels. The ADG604 also has low power dissipation yet gives high switching speeds. The ADG604 is available in a 14-lead TSSOP package.