Mounting Type: Surface Mount
Operating Temperature: -40°C ~ 85°C
Voltage Supply Source: Single, Dual Supply
Package / Case: 16-SOIC (0.154", 3.90mm Width)
Circuit: 1 x 8:1
Packaging: Tube
Function: Multiplexer
On-State Resistance: 90 Ohm
Voltage - Supply, Single/Dual (±): 12V, ±15V
Current - Supply: 100µA
Supplier Device Package: 16-SOIC
Manufacturer: Analog Devices Inc
Series: LC²MOS
DescriptionThe ADG408BRZ is one member of the ADG408 series.The ADG408 is monolithic CMOS analog multiplexer comprising eight single channels and four differential channels respectively. The ADG408BRZ switches one of eight inputs to a common output as determined by the 3-bit binary address lines A0, A1 and A2.
Features of the ADG408BRZ are:(1)44 V supply maximum ratings; (2)Vss to Vdd analog signal range; (3)low on resistance (100 max); (4)low power (ISUPPLY < 75 A); (5)fast switching; (6)break-before-make switching action; (7)plug-in replacement for DG408.In the OFF condition, signal levels up to the supplies are blocked. All channels exhibit break-before-make switching action, preventing momentary shorting when switching channels. Inherent in the design is low charge injection for minimum transients when switching the digital inputs.
The absolute maximum ratings of the ADG408BRZ can be summarized as:(1)VDD to VSS:+44 V;(2)VDD to GND:0.3 V to +25 V;(3)operating temperature range:-40 to +85;(4)storage temperature range:65 to +150;(5)lead temperature(soldering,10 sec):150;(6)TSSOP package, power dissipation:450 mW.Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device.This is a stress rating only; functional operation of the device at these or any other conditions above those listed in the operational sections of this specification is not implied.Exposure to absolute maximum rating conditions for extended periods may affect device reliability.Only one absolute maximum rating may be applied at any one time.ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection.Although the ADG408/ADG409 feature proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore,proper ESD precautions are recommended to avoid performance degradation or loss of functionality.
At present there is not too much information about this model.If you are willing to find more about ADG408BRZ, please pay attention to our web! We will promptly update the relevant information.
Parameters: | Technical/Catalog Information | ADG408BRZ |
| Vendor | Analog Devices Inc |
| Category | Integrated Circuits (ICs) |
| Type | Multiplexer |
| Voltage Supply Source | Single, Dual Supply |
| Voltage - Supply, Single/Dual (±) | 5V, 12V |
| Circuit | 1 x 8:1 |
| On-State Resistance | 100 Ohm |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (3.9mm Width) |
| Packaging | Tube |
| Current - Supply | 100A |
| Operating Temperature | -40°C ~ 85°C |
| Function | Multiplexer |
| Drawing Number | * |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | ADG408BRZ
ADG408BRZ
|
ADG408BRZ Data Sheet
