Amplifier Type: General Purpose
Type: -
Max Output Power x Channels @ Load: -
Voltage - Supply: -
Features: -
-3db Bandwidth: -
Mounting Type: Surface Mount
Package / Case: 8-SOIC (0.154", 3.90mm Width)
Slew Rate: 0.3 V/µs
Operating Temperature: -40°C ~ 125°C
Supplier Device Package: 8-SO
Number of Circuits: 1
Output Type: Rail-to-Rail
Packaging: Tube
Current - Supply: 230µA
Current - Output / Channel: 50mA
Current - Input Bias: 0.3pA
Voltage - Input Offset: 40µV
Voltage - Supply, Single/Dual (±): 5 V ~ 16 V, ±2.5 V ~ 8 V
Manufacturer: Analog Devices Inc
Series: DigiTrim®
Gain Bandwidth Product: 540kHz
DescriptionThe AD8663ARZ belongs to AD866x family which are rail-to-rail output amplifiers that use the Analog Devices, Inc., patented DigiTrimtrimming technique to achieve low offset voltage. The AD8663/AD8667/AD8669 are specified over the extended industrial temperature range of -40°C to +125°C. The single AD8663 is available in a narrow 8-lead SOIC package and a very thin, 8-lead LFCSP. The dual AD8667 is available in a narrow 8-lead SOIC package and an 8-lead MSOP. The quad AD8669 is available in a 14-lead SOIC and 14-lead small TSSOP. The railto-rail outputs provide increased dynamic range to drive low frequency data converters. The low bias current drift is wellsuited for precision I-to-V converters. The combination of precision offset, offset drift, and low noise also make the op amps ideal for gain, dc offset adjust, and active filter in both instrumentation and medical applications. These low power op amps can be used in IR thermometers, pH and ORP instruments, pressure transducer front ends, and other sensor signal conditioning circuits that are used in remote or wireless applications. The AD866x feature an extended operating range with supply voltages up to 16 V. They also feature low input bias current, low input offset voltage, and low current noise. The combination of low offset, very low input bias current, and a wide supply range makes these amplifiers useful in a wide variety of applications usually associated with higher priced JFET amplifiers. Systems using high impedance sensors, such as photodiodes, benefit from the combination of low input bias current, low noise, low offset, and wide bandwidth. The ability to operate the device for single (5 V to 16 V)or dual supplies (±2.5 V to ±8 V)supports many applications.
The features of AD8663ARZ can be summarized as (1)low offset voltage: 175 V maximum @ V SY = 5 V; (2)low supply current: 275 A maximum per amplifier; (3)single-supply operation: 5 V to 16 V; (4)low noise: 23 nV/Hz; (5)low input bias current: 300 fA; (6)unity-gain stable; (7)small packages available 3 mm * 3 mm, 8-lead LFCSP/ 8-lead MSOP; (8)other packages 8-lead SOIC/ 14-lead SOIC/ 14-lead TSSOP.
The absolute maximum ratings of AD8663ARZ are (1)supply voltage: 18 V; (2)input voltage: -0.1 V to V SY; (3)differential input voltage: 18 V; (4)output short-circuit duration to GND: Indefinite; (5)storage temperature range: -60°C to +150°C; (6)operating temperature range: -40°C to +125°C; (7)junction temperature range: -65°C to +150°C; (8)lead temperature, soldering (60 sec): 300°C .
Parameters: | Technical/Catalog Information | AD8663ARZ |
| Vendor | Analog Devices Inc |
| Category | Integrated Circuits (ICs) |
| Packaging | Tube |
| Amplifier Type | General Purpose |
| Number of Circuits | 1 - Single |
| Package / Case | 8-SOIC (3.9mm Width) |
| Slew Rate | 0.3 V/s |
| Gain Bandwidth Product | 540kHz |
| Current - Supply | 230A |
| Current - Output / Channel | 50mA |
| Voltage - Supply, Single/Dual (±) | 5 V ~ 16 V, ±2.5 V ~ 8 V |
| Output Type | Rail-to-Rail |
| -3db Bandwidth | - |
| Current - Input Bias | 0.3pA |
| Operating Temperature | -40°C ~ 125°C |
| Voltage - Input Offset | 40V |
| Drawing Number | * |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | AD8663ARZ
AD8663ARZ
|
AD8663ARZ Data Sheet
