ACS110-7SB2

Rated Repetitive Off-State Voltage VDRM :
Breakover Current IBO Max :
On-State RMS Current (It RMS) :
Off-State Leakage Current @ VDRM IDRM :
Gate Trigger Voltage (Vgt) :
Gate Trigger Current (Igt) :
Holding Current (Ih Max) :
Mounting Style : Through Hole
Packaging : Tube
Package / Case : PDIP-8


Features:

`Blocking voltage : V<sub>DRM</sub> / V<sub>RRM</sub> = +/-700V
`Avalanche controlled : V_CL typ = 1100 V
`Nominal conducting current : I<sub>T(RMS)</sub> = 1A
`Gate triggering current : I_GT< 10 mA
`Switch integrated driver
`High noise immunity : static dV/dt >500V/s


Application

· AC static switching in appliance control systems
· Drive of low power high inductive or resistive loads like
- relay, valve, solenoid, dispenser
- pump, fan, micro-motor
- defrost heater


Specifications

Symbol	Parameter			Value	Unit
VDRM /VRRM	Repetitive peak off-state voltage		Tj = 10 °C	700	V
IT(RMS)	RMS on-state current full cycle sine wave 50 to 60 Hz	SOT-223	Ttab = 105 °C	1	A
		DIL-8	Tlead = 110 °C	1	A
ITSM	Non repetitive surge peak on-state current Tj initial = 25°C, full cycle sine wave		F =50 Hz	8	A
			F =60 Hz	11	A
I2t	Fusing capability		tp = 10ms	0.35	A2s
dI/dt	Critical rate of rise of on-state current IG = 10mA, tr < 100ns		F = 120 Hz	50	A/s
VPP	Non repetitive line peak pulse voltage		note 1	2	KV
Tstg	Storage temperature range			-40 to +150	°C
Tj	Operating junction temperature range			- 30 to + 125	°C
Tl	Maximum lead temperature for soldering during 10s			260	°C

Note 1: according to test described by IEC61000-4-5 standard & Figure 3


Description

The ACS110 belongs to the AC line switch family built around the ASD™ concept. This high performance switch circuit is able to control a load up to 1 A.

The ACS110 switch embeds a high voltage clamping structure to absorb the inductive turn off energy and a gate level shifter driver to separate the digital controller from the main switch. It is triggered with a negative gate current flowing out of the gate pin.