Features: • 2.7V to 5.5V Input voltage range• Programmable over current threshold• Fast transient response:• <1µs response to short circuit• Low quiescent current• 15µA typical• 1µA max with Switch off• 160mΩ typical RDS(ON...
AAT4608: Features: • 2.7V to 5.5V Input voltage range• Programmable over current threshold• Fast transient response:• <1µs response to short circuit• Low quiescent curr...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $.12 - .2 / Piece
Power Switch ICs - Power Distribution Slew Rate Controlled Load Switch
Symbol |
Description |
Value |
Units |
VIN |
IN to GND |
-0.3 to 6 |
V |
VSET,VOUT |
SET, OUT to GND |
-0.3 to VIN+0.3 |
V |
IMAX |
Maximum Continuous Switch Current |
2 |
A |
TJ |
Operating Junction Temperature Range |
-40 to 150 |
|
TLEAD |
Maximum Soldering Temperature (at Leads) |
300 |
|
VESD |
ESD Rating1- HBM |
4000 |
V |
The AAT4608 SmartSwitch™ is a member ofAnalogicTech's Application Specific Power MOSFET™ (ASPM™) product family. It is a CurrentLimited P-channel MOSFET power switch designedfor high-side load-switching applications. This switchoperates with inputs ranging from 2.7V to 5.5V, mak-ing it ideal for both 3V and 5V systems. An inte-grated current-limiting circuit protects the input sup-ply against large currents which may cause the sup-ply to fall out of regulation. The AAT4608 is also pro-tected from thermal overload which limits power dis-sipation and junction temperatures. It can be usedto control loads that require up to 1 A. Current limitthreshold is programmed with a resistor from SET toground. The quiescent supply current is typically alow 15µA max.
The AAT4608 is available in a 5 pin SOT-23 spec-ified over -40 to85.