Application• Computers• Controllers• Telecom Equipment• Embedded Systems• Intelligent Instrumentation• AutomotivePinoutSpecifications Adjustable 4.5V or 4.75V voltage monitor 250ms (min) reset pulse width Low quiescent current: typically 23A Adjustable wat...
AAT3532: Application• Computers• Controllers• Telecom Equipment• Embedded Systems• Intelligent Instrumentation• AutomotivePinoutSpecifications Adjustable 4.5V or 4.75V ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol | Description | Value | Units |
VCC | VCC to GND | -0.5 to 6 | V |
VI/O | Voltage on I/O pins relative to GND | -0.5 to (VCC+0.5) | V |
TA | Operating Temperature Range | -40 to 85 | °C |
TS | Storage Temperature Range | -65 to 150 | °C |
TLEAD | Maximum Soldering Temperature (at Leads) for 10s | 300 | °C |
VESD | ESD Rating1-HBM | 2000 | V |
The AAT3532 PowerManager product is a member of AnalogicTech Total Power Management IC (TPM IC) product family. It is a fully integrated device for monitoring microprocessor activity, external reset, and power supply conditions. The device holds the microprocessor in a reset condition for a minimum of 250ms while VCC is established to ensure correct system start-up. A manual reset can be initiated via a debounced input pin. As an additional level of protection, the AAT3532 includes a watchdog timer which requires a periodic strobe input from the microprocessor to ensure correct operation. The AAT3532 has a programmable watchdog timer and voltage tolerance level. The quiescent supply current is extremely low, typically 23A. The AAT3532 is available in an 8-pin SOP package specified over the -40 to +85C temperature range.
The AAT3532 PowerManager™ product is a member of AATI's Total Power Management™ IC (TPM IC™) product family. It is a fully integrated device for monitoring microprocessor activity, external reset, and power supply conditions. The device holds the microprocessor in a reset condition for a minimum of 250ms while VCC is established to ensure correct system start-up. A manual reset can be initiated via a debounced input pin. As an additional level of protection, the AAT3532 includes a watchdog timer which requires a periodic strobe input from the microprocessor to ensure correct operation. The AAT3532 has a programmable watchdog timer and voltage tolerance level. The quiescent supply current is extremely low, typically 23A.
The AAT3532 is available in an 8-pin SOP package specified over -40° to 85°C temperature range.