Features: ±2.5 A, 35 V output rating
Low RDS(On) outputs: 0.28 source, 0.22 sink, typical
Automatic current decay mode detection/selection
3.0 to 5.5 V logic supply voltage range
Slow, Fast or Mixed current decay modes
Home output
Synchronous rectification for low power dissipation
Internal UVLO and thermal shutdown circuitry
Crossover-current protectionSpecificationsLoad Supply Voltage,VBB ......................................35 V
Output Current, IOUT.........................................±2.5 A*
Logic Supply Voltage, VDD ...................................7.0 V
Logic Input Voltage Range, VIN
tW > 30 ns........................ 0.3 V to VDD + 0.3 V
tW < 30 ns..............................1 V to VDD + 1 V
Sense Voltage, VSENSE .......................................0.5 V
Reference Voltage, VREF .........................................VDD
Package Power Dissipation, PD....................See page 5
Operating Temperature Range
Ambient, TA , Range S ............................ 20°C to 85°C
Junction Temperature, TJ(MAX)..............................150°C
Storage Temperature, TS ..................... 55°C to 150°CDescriptionThe A3979 is a complete microstepping motor driver with built-in translator, designed as a pin-compatible replacement for the successful A3977, with enhanced microstepping (1/16 step) precision. It is designed to operate bipolar stepper motors in full-, half-, quarter-, and sixteenth-step modes, with an output drive capacity of up to 35 V and ±2.5 A. The A3979 includes a fixed off-time current regulator that has the ability to operate in Slow, Fast, or Mixed decay modes. This current-decay control scheme results in reduced audible motor noise, increased step accuracy, and reduced power dissipation.
The translator is the key to the easy implementation of the A3979. It allows the simple input of one pulse on the STEP pin to drive the motor one microstep, which can be either a full step, half, quarter, or sixteenth, depending on the setting of the MS1 and MS2 logic inputs. There are no phase-sequence tables, high-frequency control lines, or complex interfaces to program. The A3979 interface is an ideal fit for applications where a complex microprocessor is unavailable or is overburdened.
Internal synchronous-rectification control circuitry is provided to improve power dissipation during PWM operation. Internal circuit protection includes: thermal shutdown with hysteresis, UVLO (undervoltage lockout), and crossover-current protection. Special power-on sequencing is not required.
The A3979 is supplied in a low-profile (maximum height 1.20 mm), 28-pin TSSOP with exposed thermal pad. The package is available in a lead (Pb) free version, with 100% matte tin leadframe plating.
A3979 Data Sheet
