IC MOTOR DRIVER PWM FULL 16-DIP
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Series: | - | Manufacturer: | Allegro Microsystems Inc |
Applications: | PWM Motor Driver | Evaluation Tools: | - |
Number of Outputs: | 1 | Current - Output: | ±1.3A |
Package / Case : | QFN-16 | Voltage - Load: | 3 V ~ 50 V |
Voltage - Supply: | 3 V ~ 5.5 V | Operating Temperature: | -20°C ~ 85°C |
Mounting Type: | Through Hole | Package / Case: | 16-DIP (0.300", 7.62mm) |
Supplier Device Package: | 16-DIP |
Load Supply Voltage, VBB . . . . . .. . . . . 50 V
Output Current, IOUT
(Continuous) . . . . . . . . . . . . ........ . ±1.3 A*
Logic Supply Voltage, VCC . . . .. . . . . . 7.0 V
Logic/Reference Input Voltage Range,
VIN . . . . . . . . ......... . . -0.3 V to VCC + 0.3 V
Sense Voltage, VSENSE
(VCC = 5.0 V) . . . . . . . . . . . . . . ........ . 1.0 V
(VCC = 3.3 V) . . . . . . . . . . . ........ . . . . 0.4 V
Package Power Dissipation,
PD . . . . . . . . . . . . . . . . . ........ . . See Graph
Operating Temperature Range,
TA . . . . . . . . . . . . . . ...... . -20°C to +85°C
Junction Temperature, TJ . . . . . . . +150°C†
Storage Temperature Range,
TS . . . . . . . . . . . . . ...... . -55°C to +150°C
* Output current rating may be limited by duty cycle, ambient temperature, and heat sinking. Under any set of conditions, do not exceed the specified current rating or a junction temperature of 150°C.
† Fault conditions that produce excessive junction temperature will activate the device's thermal shutdown circuitry. These conditions can be tolerated but should be avoided.
Designed for bidirectional pulse-width modulated (PWM) current control of inductive loads, the A3953S- is capable of continuous output currents to ±1.3 A and operating voltages to 50 V. Internal fixed off-time PWM currentcontrol circuitry can be used to regulate the maximum load current to a desired value. The peak load current limit is set by the user's selection of an input reference voltage and external sensing resistor. The fixed off-time pulse duration is set by a user- selected external RC timing network. Internal circuit protection includes thermal shutdown with hysteresis, transient-suppression diodes, and crossover current protection. Special power-up sequencing is not required.
With the ENABLE input held low, the PHASE input controls load current polarity by selecting the appropriate source and sink driver pair. The MODE input determines whether the PWM current-control circuitry operates in a slow current-decay mode (only the selected source driver switching) or in a fast current-decay mode (selected source and sink switching). A user-selectable blanking window prevents false triggering of the PWM current-control circuitry. With the ENABLE input held high, all output drivers are disabled. A sleep mode is provided to reduce power consumption.
When a logic low is applied to the BRAKE input, the braking function is enabled. This overrides ENABLE and PHASE to turn off both source drivers and turn on both sink drivers. The brake function can be used to dynamically brake brush dc motors.
The A3953S- is supplied in a choice of two power packages; a 16-pin dual-in-line plastic package with copper heat-sink tabs, and a 16-pin plastic SOIC with copper heat-sink tabs. For both package styles, the power tab is at ground potential and needs no electrical isolation. Each package type is available in a lead-free version (100% matte tin plated leadframe).
Technical/Catalog Information | A3953SB-T |
Vendor | Allegro Microsystems Inc |
Category | Integrated Circuits (ICs) |
Applications | PWM Motor Driver |
Number of Outputs | 1 |
Voltage - Supply | 3 V ~ 5.5 V |
Voltage - Load | 3 V ~ 50 V |
Current - Output | ±1.3A |
Operating Temperature | -20°C ~ 85°C |
Package / Case | 16-DIP |
Packaging | Tube |
Drawing Number | * |
Lead Free Status | Lead Free |
RoHS Status | RoHS Compliant |
Other Names | A3953SB T A3953SBT 620 1065 ND 6201065ND 620-1065 |