Features: Chopper stabilization for stable switchpoints throughout operating temperature range
Externally programmable operate point (through VCC pin)
On-board voltage regulator for 4.2 V to 24 V operation
On-chip protection against:
Supply transients
Output short-circuits
Reverse-battery conditionDescriptionThe A3250 and A3251 are field-programmable, chopper-stabilized, unipolar Hall-effect switches designed for use in high-temperature applications. These devices use a chopper-stabilization technique to eliminate offset inherent in single-element devices.
The A3250 and A3251 are externally programmable devices. The devices have a wide range of programmability of the magnetic operate point (BOP) while the hysteresis remains fixed. This advanced feature allows for optimization of the sensor switchpoint and can drastically reduce the effects of variations found in a production environment, such as magnet and device placement tolerances.
These devices provide on-chip transient protection. A Zener clamp on the power supply protects against overvoltage conditions on the supply line. These devices also include short-circuit protection on the output.
The output of the A3250 switches LOW when subjected to a south-polarity magnetic field with a flux density that exceeds the threshold for BOP, and switches HIGH when the field drops below the magnetic release point, BRP. The output of the A3251 has the opposite polarity, switching HIGH in a south-polarity magnetic field that BOP, and switching LOW when the field drops below BRP.
The other differences in the devices are the power-on state. The A3250 powers-on in the HIGH state, while the A3251 powers-on in the LOW state.
These devices A3250 are available in a TO-92 three-lead ultra-mini SIP (Single In-line Package), with either straight lead configuration, or formed and trimmed leads for horizontal mounting.
A3250 Data Sheet
