Features: 1) On-chip Hall sensor IC with two different sensitivity and hysteresis settings for A266.2) Internal bandgap regulator allows temperature compensated operations and a wide operating voltage range.3) High output sinking capability up to 300mA for driving large load.4) Lower current chang...
A266: Features: 1) On-chip Hall sensor IC with two different sensitivity and hysteresis settings for A266.2) Internal bandgap regulator allows temperature compensated operations and a wide operating volta...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
A266 is an integrated Hall sensors with output drivers designed for electronic commutation of brushless DC motor applications. The A266 includes an on-chip Hall voltage generator for magnetic sensing, a comparator that amplifies the Hall voltage, and a Schmitt trigger to provide switching hysteresis for noise rejection, and complementary open-collector drivers for sinking large current loads. An internal bandgap regulator is used to provide temperature compensated supply voltage for internal circuits and allows a wide operating supply range.
If a magnetic flux density larger than threshold Bop,DO is turned on(low) and DOB is turned off (high). The output state of A266 is held until a magnetic flux density reversal falls below Brp causing DO to be turned off and DOB turned on.
A266 is rated for operation over temperature range from -20 oC to 100 oC and voltage range from 3.5V to 28V. The devices are available in low cost die forms or rugged 4 pin SIP packages.