A1373LKB

Series: -
Current - Supply: 10mA
Package / Case: 3-SIP
Supplier Device Package: 3-SIP
Operating Temperature: -40°C ~ 150°C
Current - Output (Max): 10mA
Output Type: Analog, Ratiometric
Packaging: Bulk
Voltage - Supply: 4.5 V ~ 5.5 V
Manufacturer: Allegro Microsystems Inc
Features: High Precision
Sensing Range: 1.75mV/G ~ 11.25mV/G
Type: Bipolar or Unipolar, Programmable


Features:

·Output pin programming
·Field-programmable for optimal application integration
·Selectable coarse and fine gain and quiescent output voltage
·Selectable sensitivity temperature coefficient
·Selectable output clamp voltage level, including no-clamp (rail-to-rail)
·Selectable output polarity
·Unipolar or bipolar operation
·Ratiometric sensitivity, clamps, and quiescent output voltage
·Chopper-stabilized Hall technique
·Wide operating temperature range
·On-chip regulator for over/under voltage protection
·On-chip regulator provides EMI robustness
·Wide lead-spacing with KB package


Specifications

Supply Voltage, V_CC ...........................................16 V
Reverse-Supply Voltage, V_RCC ........................16 V
Output Voltage1, V_OUT.......................................16 V
Reverse-Output Voltage, V_ROUT ....................0.1 V
Output Current
Source, I_OUTSOURCE ........................................ 3 mA
Sink, I_OUTSINK................................................ 10 mA
Operating Temperature
Ambient, T_A, Range E....................... 40ºC to 85ºC
Ambient, T_A, Range L..................... 40ºC to 150ºC
Maximum Junction, T_J(max).............................165ºC
Storage Temperature, T_S .............. 65ºC to 170ºC
¹When blowing fuses during device programming, a voltage of 28 V may be applied to VOUT.


Description

The A1373 and A1374 high precision linear Hall effect sensors are sensitive, temperature stable, linear devices with externally programmable features. A1373 and A1374 family incorporates a chopper-stabilized amplifier, voltage regulator, programming logic, and an output amplifier on a single IC. The patented dynamic offset cancellation used with a chopper-stabilization technique provides extremely low offset and minimal temperature drift. A high frequency clock is used for chopping, to ensure high frequency signal processing capability. The A1373 and A1374 are ideal for use in automotive and industrial linear position-sensing applications that require increased reliability and accuracy over conventional contacting-potentiometer solutions. Key applications include: throttle position sensors, pedal position sensors, and suspension height sensors.

The design and manufacturing flexibility of the A1373 and A1374 complement the Allegro linear Hall effect family of devices by offering programmable gain, quiescent offset voltage for unipolar or bipolar operation, temperature coefficient, clamps, and polarity. The A1373 and A1374 can be set up in a magnetic circuit and programmed with a train of serial pulses via the output pin. Once the right combination of gain, quiescent output voltage, and temperature coefficient has been selected, the codes can be locked for one-time programming. In this manner, manufacturing tolerances can be reduced and the assembly process can be simplified.

A1373 and A1374 are available in the KB package, a 3-pin SIP (single inline package). The lead (Pb) free version has a 100% matte tin plated leadframe.

Parameters:

Technical/Catalog Information	A1373LKB
Vendor	Allegro Microsystems Inc.
Category	Sensors, Sensor Evaluation Kits
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	A1373LKB A1373LKB